Как поднять tftp сервер на windows 10

4

How to Install TFTP Server on Windows 10

Last Updated: December 28, 2021 , Tolga Bagci

In this article, we will examine how to install a TFTP server using SolarWinds TFTP Server to transfer files on a Windows PC.

How to Configure TFTP Server on PC

TFTP (Trivial File Transfer Protocol) performs the file/data transfer operation. However, we can say that it is a non-secure protocol when compared with the FTP protocol.

In our previous article, we gave information about TFTP. In this article, we’ll build a TFTP server to PC with SolarWinds.

As you know, the TFTP protocol structure divides into two as Server and Client. You can run a server by installing the 3rd software on a laptop or desktop computer that you are using.

You do not need a physical server for the server. You can install SolarWinds software on a simple computer and create a file server.

What is TFTP Server?

It listens to the UDP 69 port on the network and provides file-based services to clients. Typically, it is used to install software on Cisco or any branded Router. It is not recommended to use the TFTP in an environment where your security is more important.

FTP or another protocol can be used instead of TFTP. You can also test this protocol by setting up a server temporarily on the local network to better understand this protocol.

How to Setup SolarWinds TFTP Server

First, download the SolarWinds Server by clicking the button below. Then, create a new virtual machine on the VMware or VirtualBox virtualization program and install a clean Windows 10 on it.

After you have completed the necessary steps, follow the steps below to set up the file server.

Step 1

Configure the network settings for the VMware virtual machine as Bridged.

Step 2

You can also configure VMnet0 as a bridge in VMware Virtual Network Editor.

Step 3

Run the Windows 10 virtual machine.

Step 4

Copy the SolarWinds TFTP Server program that you downloaded on your computer to the Win10 virtual machine and run the installation file as an administrator.

Step 5

In the SolarWinds setup window, click the Next button.

Step 6

Accept the SolarWinds license agreement and click on the Next button.

Step 7

Click on the Next button again.

Step 8

Leave the destination location as default and click on Next.

Step 9

Click the Install button to install SolarWinds software.

Step 10

Click on the Finish button in the InstallShield window.

Step 11

Open the SolarWinds program, and then click on the File menu.

Step 12

As you can see, the service is not working right now. Click the Start button to start the TFTP service.

Step 13

You can change the storage location of the server.

Step 14

After you start the service, the TFTP-Root folder is created on the C:\ drive.

Step 15

Create 2 text documents in the TFTP-Root folder.

Step 16

After installing TFTP Server, you must configure your Host machine as TFTP Client.

To enable TFTP Client, go to Control Panel / All Control Panel and click “Turn on Windows Features on or off” in the Programs and Features window.

Step 17

There is more than one service in the window that opens. When you scroll down, you will see the TFTP Client service. After activating the TFTP Client service, click OK.

Step 18

Click the Close button in the Windows Features.

Step 19

After you press Windows Key + R on your Host, the Run window will open. In the Windows Run window, type CMD and press the Enter key.

At the CMD command prompt, execute the “TFTP” command. You can review whether the TFTP Client service is running.

Step 20

In this step, use the command “tftp -i 192.168.1.102 get 1.txt” at the CMD command prompt to transfer the text document that you created on the TFTP Server to the desktop location of the Host.

Step 21

You have successfully copied 1.txt from the server!

Step 22

Open the 1.txt text document you transferred and write something inside and save the file. If the text document is Read-Only, you can change it from the file properties.

Step 23

To send the text document that you have edited on your host computer to the server, follow the command “tftp -i 192.168.1.102 put 1.txt” at the CMD command prompt.

Step 24

File transfer completed successfully.

Step 25

Open the file 1.txt in the TFTP-Root folder and check the change.

Step 26

After you have successfully configured the software, you can review the log files of the file transfer you made.

Video

Final Word

In this article, we have installed and configured SolarWinds software, the best program to use TFTP Server in a network structure. And finally, we’ve reviewed how to transfer a file to the server after installing the TFTP Client on the Host computer. Thanks for following us!

Related Articles

Hello, I’m Tolga! I am a computer specialist who has been specializing in computer technologies for about 20 years. I provide solutions to problems encountered in many areas such as hardware, system, network, virtualization, server systems, and operating systems, and create relevant content on my website by explaining how to solve these problems. My goal is to be a reliable source of expert, quality, and trustworthy solutions for your computer problems. By following innovations and using the latest technologies, I aim to be successful in my job and provide you with the best service. Don’t hesitate to contact me for any questions or curiosity about technology. Have a nice day, stay up to date 🙂

Настройка TFTP сервера в Windows 10

Сервер TFTP предназначен для управления загрузкой бездисковых ПК (рабочих станций), но также эффективен для передачи файлов между удаленными системами. Этот упрощенный протокол передачи файлов очень прост в использовании.

Альтернатива домашней сети

Домашняя группа Windows была удобным инструментом для обмена файлами по сети. Но была исключена с обновлением Windows 10 до версии 1803. Для замены можно использовать TFTP-сервер, который интуитивный в настройке, достаточно надежный и позволяет передавать данные на быстрой скорости.

Перед настройкой сервера TFTP нужно выполнить следующие действия:

1. Войдите в систему под учетной записью администратора.
2. Загрузите установщик TFTP-сервера компании SolarWinds. После распакуйте загруженный zip архив в любое место на диске и установите программу, следуя инструкциям на экране.
3. Чтобы разрешить удаленный доступ к серверу, нужно переадресовать UDP-порт 69 на IP адрес домашней сети. Но, если удаленное подключение не требуется, то переназначать порты не нужно.

Настройка сервера TFTP

Если разрешили доступ к TFTP-серверу за пределами локальной сети дома, офиса и другого места, проверьте, что статический или динамический IP добавлен в диапазон адресов. По умолчанию на сервере разрешены все IP адреса для передачи и получения файлов, а также перенаправление портов. Можно ограничить диапазон IP, чтобы разрешить только несколько адресов.

Для настройки сервера следуйте инструкции:

1. После запуска утилиты SolarWinds TFTP Server, перейдите в File — Configure. Для отображения иконки в правом нижнем углу на панели задач отметьте флажком поле «Добавить сервер в системный трей Windows».
2. Выберите корневой каталог сервера. В нем будут храниться все отправленные и принятые файлы. Чтобы передать файлы, их нужно будет скопировать в этот каталог.
3. Перейдите на вкладку Безопасность, чтобы ввести некоторые ограничения. Здесь можно включить прием или передачу, разрешить определенный диапазон IP или только один адрес.
4. После нажмите на ОК, чтобы сохранить настройки, и закрыть окно конфигурации.

Как пользоваться TFTP сетью

Если нужен доступ из устройств за пределами сети, потребуется переадресация порта 69. Поскольку экраны настроек разных моделей маршрутизаторов отличаются, предлагаем вам базовое представление.

1. Нужно войти в панель конфигурации роутера с адресной строки браузера и ввести логин и пароль, которые указаны в инструкции к устройству.
2. Откройте расширенные настройки и найдите NAT или Port Forward.
3. Сделайте новую запись и перенаправьте UDP порт 69 на ipv4-адрес.

Если не собираетесь передавать файлы из компьютеров за пределами вашей домашней сети, процедуру с перенаправлением портов можно пропустить.

Конфигурация клиента TFTP

Перейдем к установке клиента на удаленном или локальном компьютере.

1. Откройте панель управления и перейдите в раздел «Программы и компоненты».
2. С левой стороны экрана кликните на пункт «Включить или выключить компоненты Windows».
3. Найдите в списке клиента TFTP и установите флажок. Подтвердите изменения на ОК.

Помните, что установку клиента нужно произвести на компьютере, на котором не запущен сервер TFTP.

Настройка брандмауэра

После установки клиента нужно либо отключить Брандмауэр Windows, либо добавить исключение для соединений TFTP.

1. Откройте панель управления, измените просмотр на крупные значки и выберите Брандмауэр Windows.
2. С левой стороны нажмите на кнопку «Включение или выключение брандмауэра Windows».
   Переключите флажки в двух секциях в положение «Отключить».
3. Если не хотите полностью отключать эту функцию защиты, можно добавить исключение для соединений TFTP. Для этого вернитесь в предыдущее окно и выберите «Разрешить запуск программы или компонента через брандмауэр».
4. Нажмите на кнопку «Разрешить другую программу», затем на «Обзор». Найдите и добавьте исполняющий файл TFTP.exe, который находится в каталоге Windows\System32.
5. Установите флажки в полях «частная» и «публичные» и нажмите на ОК.

Как передавать файлы в сети TFTP

После установки клиента и перенаправления порта перейдем к передаче файлов. Убедитесь, что сервер запущен, затем следуйте инструкциям:

Нажмите Win + R, в диалоговом окне наберите cmd для вызова командной строки. Перенесите или скопируйте файлы, которые хотите передать, в корневой каталог сервера.

Для отправки файлов нужно использовать параметр PUT, при получении GET. Синтаксис команды выглядит следующим образом:

Tftp -i [server IP address] [GET или PUT] [путь к файлу]

Например, для передачи используйте команду:

Tftp -i 192.168.10.3 put E:\file.txt

Если хотите получить файл, то команда будет выглядеть:

Tftp -i 192.168.10.3 get file.txt

Если хотите переслать на удаленное устройство за пределами сети, нужно указать публичный IP-адрес в командной строке, а затем порт. Примером может быть:

Setup & Configure TFTP On Windows 10 – Easy Guide to Trivial File Transfer!

Last Updated: July 12th, 2020 by Hitesh J in Guides, Windows

TFTP stands for “Trivial File Transfer Protocol” is a simple and lightweight protocol for transferring files over the network.

TFTP runs on UDP port 69 and does not use any security during the file transfer, thus its really only good for transferring files within your LAN. It is commonly used in the place where security is not important and it has limited features compared to other file transfer protocols (FTP/FTPS/SCP).

Generally, TFTP is used to boot operating systems over the network. CISCO devices also use the TFTP protocol to store configuration files and images and move them to and from switches, routers and firewalls.

It is very useful for electronics circuit boards and microprocessors to download firmware into the chipset and its also used for transferring boot files and updating NVRAM. It does not provide authentication and no command structure like FTP, SFTP and SCP.

TFTP cannot list directory and there is no error recovery like TCP and nor does it allow you to delete or rename files.

TFTP is used for its simplicity as it is specifically designed to read and write files without establishing a connection between the client and the server.

It is very useful for thin clients, terminals and disk-less workstations with no room to install their own operating systems.

TFTP protocol also allows the network clients to automatically obtain the IP address of the TFTP server thus making TFTP not only easy to implement but also provide a better way for file transfers.

However, sending or receiving sensitive files via the TFTP without authentication or encryption is very risky.

In this tutorial, we’ll learn how to setup a TFTP server and a TFTP Client on Windows a system and also learn how to configure your Firewall to allow file transfer between the TFTP server and the TFTP client.

Install TFTP Server Windows

First, you will need to download the SolarWinds TFTP server from their download page:

Once downloaded, extract the downloaded file and double click on the installer to start the installation, you should see the following screen:

Click on the Next button.

You will be redirected to the License agreement page as shown below:

Accept the License agreement and click on the Next button.

You will be asked to provide the location of the TFTP server as shown below:

Click on the Next button to continue with the default location.

You should see the following page:

Click on the Finish button to complete the installation.

After installing the TFTP server, you will need to configure it.

You can follow the below steps to configure the TFTP server:

Configure TFTP Server

1. Open the TFTP Server from the Start Menu as shown below:

2. Click on the File => Configure button as seen in the above Screenshot.

You should see the following screen:

3. As seen in the screenshot above, Select the TFTP Server Root Directory field and provide the TFTP root directory, then click on the Security tab.

You should see the following screen:

4. In the Permitted Transfer Types section, check the box “Send and Receive files” and “Allow All IP address to send/receive Files” and click on the OK button to finish the configuration.

Once you are finished, you can proceed to the next step.

Install TFTP Client

At this point, the TFTP server is installed and configured.

Now, you will need to install a TFTP Client on the Client computer.

You can install the TFTP Client on the client computer by following the below steps:

1. Click on the Start Menu and click on Control Panel.

2. Click on the Programs and Features => Turn Windows features on or off. This will open the Windows Features dialog box.

3. Scroll down until you see the TFTP Client check box and CHECK it as shown below:

4. Click on the OK button to start the installation process of the TFTP client.

This process will take some time to finish the installation. Once you are finished, you can proceed to the next step.

Configuring Firewall to Allow TFTP

Before using the TFTP client, you will need to turn off the Windows Firewall or configure the Firewall to allow the inbound/outbound transfer of files using the TFTP client.

You can follow the below steps to add an exception for the TFTP connections:

1. Go to the Start Menu and open the Control Panel as shown below:

2. Click on the Windows Firewall to open the firewall as shown below:

3. In the left-pane, click on the “Allow an app or feature through Windows Firewall“.

You should see the following page:

4. Click on the Allow an app or feature through Windows Firewall at the bottom. You should see the following page:

5. Click on the Browse button and specify the TFTP.EXE path and click on the Add button.

You should see the following page:

6. You should see that the Trivial File Transfer Protocol App should be highlighted.

7. Now, click on the OK button to finish the process.

At this point, your client computer is configured to allow PUT and GET command against your TFTP server.

Transfer File with TFTP Client

You are now ready to transfer file using the TFTP client.

Go to the TFTP client computer, open the command line interface and run the following command:

You should see all the options available with tftp command in the following page:

If you want to send a file to the TFTP server, use the following syntax:

tftp your-tftpserver-ip put location-of-the-file

For example, to send the file named testfile.txt located in Documents directory to the TFTP server run the following command:

tftp 172.31.14.171 put Documents/testfile.txt

Once the file transfers successfully, you should see the following output:

Transfer successful: 73 bytes in 1 second(s), 73 bytes/s

If you want to transfer file from the TFTP server to your local computer, use the following syntax:

tftp your-tftpserver-ip get location-of-the-file

For example, transfer the file named testfile.txt from the TFTP server to your local computer run the following command:

tftp 172.31.14.171 get testfile.txt

Once the file transfers successfully, you should see the following output:

Transfer successful: 73 bytes in 1 second(s), 73 bytes/s

Example Screen:

You can also transfer the files over the internet using the Public IP address of the TFTP server – Please remember, there is not encryption or any security when sending over the Internet!

Conclusion

In the above guide, we’ve learned how to install and configure the TFTP server and Client on Windows system.

You can now easily transfer files to and from your TFTP server for FREE.

Please Feel free to ask us any questions below in the comments, we’ll try to answer them immediately!

Comments & Discussion:

Hello, I am new to tftp and linux. Hence I wish to know it is possible to communicate between linux PC to Windows 10 OS (tftp server)? for example, linux get a file from Windows 10 OS tftp server.

Many Thanks.
Walter

Great Questions Walter – From our tests, its best to Stick to a similar OS for moving files via FTP – Although we’ve had success moving files to Layer 3 Routers from Windows TFTP Servers for updates, so it may be worth a test! Thanks

Setup & Configure TFTP On Windows 10 (Free Server Tool)

Network admins use TFTP Servers every day to transfer images, configuration files, firmware, etc. to their networking devices.

TFTP is simple on its own and does not need any sophisticated messaging to work.

Of course, having no overhead is terrific, but there is a downside; it does not provide any encryption and authentication mechanisms.

Although TFTP has no built-in security, network admins use it for simple and fast file transfers within LANs.

And best of all, it can be used for remote connections by hardening its security with the right server/client software.

In this step-by-step tutorial, you’ll learn how to set up and configure TFTP on Windows 10.

We’ll learn how TFTP works, and how to set it up on the client and server.

Let’s get started!

What is TFTP?

TFTP (Trivial File Transfer Protocol) is a simple file transferring mechanism developed as a “lighter” version of FTP.

It attempts to over-simplify and downsize the functionality of FTP.

Instead of using the full TCP implementation, TFTP relies on the connectionless and simple UDP transport over port 69.

TFTP only allows unidirectional file transferring.

It provides zero control and has low overhead.

The original idea of creating TFTP was to provide booting for disk-less computers or workstations that didn’t have enough memory or disk.

These disk-less workstations usually do not have access to the full TCP/IP stack, so they need to obtain configuration information such as DHCP or BOOTP from another server.

TFTP uses a client/server communication model.

As as you can see from the message exchange below, the TFTP server sends a block of data and waits for the acknowledgment before sending the next one.

A host sends a Request to Write (WRQ), the server responds with an Acknowledgement (ACK), so the host sends data.

The host can also send a Request to Read (RRQ) then the server sends the data and waits for an acknowledgment.

Today TFTP is commonly used for transferring configuration files and firmware images from and to networking devices.

It is also used for network booting by diskless nodes that need booting from the LAN.

TFTP is very easy to implement and use.

But it is not a secured transfer method.

It does not provide a login or access control mechanism, so it is more common in LANs.

Preparing your TFTP Environment

A TFTP server is a must-have piece of software in every network admin’s toolkit.

Cisco, Huawei, Netgear, and many more network appliances use TFTP for upgrading, backing-up, and saving configuration files and firmware.

Fortunately, you can set up and configure a TFTP server on your Windows 10 machine. You’ll need the following post if you’re looking for a TFTP client for Windows 7

SolarWinds Free TFTP Server is lightweight and compatible with Windows 10.

It is a standalone free tool use for fast and easy network file transfers.

Prerequisites Before We Start

When setting up your TFTP server for the first time, consider the following requirements:

1. Download the Free TFTP Server To start, you’ll need to get the software. Download SolarWinds Free TFTP Server from its official site. The software is 100% free.
2. Have Admin Rights Setting a TFTP server requires an administrator account.
3. Have a Root Folder Ready In the end, the idea of using TFTP is to transfer files. Since you are configuring a TFTP server, you’ll need to have a folder storing all transferable files, such as OS firmware, configuration files, DCHP, etc.
4. Port forwarding TFTP clients might be able to access the server within the local network area without any issues, so if you don’t need remote file transfers, skip the port forwarding. But if TFTP clients are located across the WAN, they need their traffic to be forwarded to the correct destination. Port Forwarding is a setting in the local router that redirects requests from IP address and port number from WAN to another service on the LAN. To allow TFTP requests from remote TFTP clients into your LAN, you will need to log into the router and forward the UDP port 69 to the IP address of your server.
5. Configuring Port Forwarding This varies from router to router. Generally, most routers have it under Advanced Setup > NAT > Port Forward. Make a new entry on the list as Port (69) > UDP > IP Address (your IP)
6. Allow local firewall rules The local firewall might block TFTP file transfers. To allow the TFTP client to successfully request data to the TFTP server, avoid any firewall that might be blocking the connection. If possible, configure the firewall inbound/outbound rules to allow TFTP traffic. In the same way, make sure that there are no local firewalls or routers with ACLs blocking the TFTP connection.

Setting up a TFTP Server on Windows 10

So, now you have the TFTP environment ready.

You downloaded the TFTP server software, have admin rights on the server, have the root folder with all files, made the right configurations on the local router, and you are sure that nothing is blocking your TFTP connection.

Let’s go ahead and install the TFTP server:

1. Unpack the zip drive downloaded from the SolarWinds TFTP server and open the executable file. The SolarWinds TFTP Wizard will open, click on “Next”.
   Download Free!
   
2. Click “Browse” to choose a destination location.
3. Once the SolarWinds TFTP Server Setup finishes, click “Finish”.
4. Open the SolarWinds TFTP Server. The console should look something like this…

Configuring Security

TFTP is known for its lack of security. It does not have any encryption mechanism and does not support any client/server authentication methods.

Without encryption and authentication, a hacker could easily spoof the TFTP server and compromise the authenticity of critical files such as routing configuration and DCHP.

But despite that lack of security, TFTP is still the preferred method for quick and easy file sharing on networking devices.

Having no encryption and authentication makes TFTP fast and without much overhead.

Still, some TFTP server software can provide some features that guarantee a certain level of security.

• Restrict the use of the server to a certain range or single IP addresses.
• Permit or restrict certain types of file transfers. For example, only send, receive, or both.

To configure IP address restriction and file transfer types in the Solarwinds TFTP server

1. Go to File > Configure.
2. Go to the Security tab.
3. By default, SolarWinds TFTP Server will allow all IP addresses to send/receive files. But you may also want to restrict the access to the TFTP server to specific IP addresses. If you want to restrict the server to a few networking devices, go ahead and click on “Only allow the following IP addresses to send/receive files,” then click on “Add”.
4. In the following screen, you can define the IP address or range of addresses. For example, we are restricting access to sending/receiving files to the devices with IP from 192.68.0.100 to 192.168.0.120.
5. In the same Security tab, you can also restrict transfer types. When you restrict IP addresses and transfer types, your security can be dramatically improved. For example, you may only want to allow sending files to a specific router.
6. Click Ok.

Binding the Server to Specific IP addresses, Subnet, or interfaces

The tool we’re using also comes with “Server Bindings,” which is another fantastic feature that can improve security.

Server Bindings is similar to restricting IP addresses, except that you can customize this restriction based on your local TFTP server network interfaces.

If your server has more than one interface, you can customize its connectivity based on “source IP” or “subnet.” In other words, you can limit the number of available interfaces that the TFTP server is listening to.

By default, the TFTP server will process the requests from clients received from any network interface

1. If you want to customize the server’s bindings, for example, allow an entire subnet (from an interface) and allow a single IP on another, go to File > Configure > Server Bindings, and click on “Use custom server binding.”
2. You also have the option to bind to all addresses in the list that you provided or go through the list in descending order. Once, you finished, click “OK

Configuring the TFTP Server

First, let’s make sure that the service has started.

If you find the following message: “TFP Server service status: stopped,” try clicking the “Start” button to start the TFTP service in the server application and wait a couple of seconds.

If it goes “stopped” again, try the following.

1. Go to Windows services. Open Windows search bar and type “services”. Or type the Win+R keys to open the Run application and type “services.msc”. Make sure to run “services.msc” as an administrator.
2. Find the service “SolarWinds TFTP Server” and double-click it. Make sure that its Startup Type is “Automatic” and if you see the Service status: Stopped, click the “Start” button.
3. If you still see the service “Stopped,” disable any Antivirus or Firewall and test again. One of these applications might be blocking communication through port 69.

Configuring Other Parameters

1. A useful setting for easier access to the application is to enable “Add TFTP Server to Windows System Tray”.
2. You can leave Timeout and Retry options, with their default settings unless you are testing the TFTP environment
   1. TFTP timeout: This is the TFTP session timeout in seconds.
   2. Retry: The number of times, the server will retry to transmit a packet when the TFTP client doesn’t respond.
   1. Go to “Storage” > “Browse”. Choose a new folder or leave the “C:\TFTP-Root” folder created by default.
   2. Click on “Ok”.

   Setting up the TFTP Client

   The TFTP Client depends on the successful installation and configuration of the TFTP server. The client is probably the one that you will be using the most.

   The only task you might need to do with the server is to update the shared files and input/remove some IPs.

   When using the TFTP server, don’t forget about the following settings (already mentioned).

   1. The TFTP server service has to be up and the application is running.
   2. Configure the right TFTP folder.
   3. Make sure no Firewall and Antivirus is blocking the application and connection.
   4. If you are file sharing to a remote location, don’t forget about port forwarding.
   5. Make sure all your TFTP clients can reach your TFTP server.

   From the TFTP client

   Most networking devices already have TFTP enabled. For example, to transfer a Cisco Switch image from the server to the device, you would have to specify the IP address of the TFTP server on the client (Cisco Switch).

   As you can see from the screenshot below, this switch does not have any configuration or image filename.

   It does have a default address and a TFTP address. So to receive these missing files, you can use the IOS command “copy tftp startup-config [ip address of the TFTP server]”.

   Another example, from a Huawei Switch (screenshot below).

   The first line (TFTP get) downloads the files from the TFTP Server (192.168.0.2) to the switch.

   The second line (TFTP put) uploads the files from the switch device to the TFTP server.

   But networking devices are not the only ones that can run TFTP clients. You can also run the client on a Windows system.

   Install TFTP Client on Windows 10

   Fortunately, most Windows versions (servers and workstations) come with the TFTP client feature built-in, you only have to enable it.

   1. Go to Windows Start and search for “Control Panel” then click on “Programs”
   2. Open Turn Windows features on or off.
   3. From the Windows Features list, find the TFTP Client feature and turn it on. Wait for the installation to complete and click “Ok”.

   TFTP is considered an unsafe protocol, so Windows does not allow it by default. You will have to either turn off the Windows firewall (which is not recommended) or add an exception on the Firewall for the TFTP Client.

   Let’s open the Windows Firewall and configure the rules and exceptions to allow TFTP.

   1. Open the Windows Start menu and type “Firewall” > open the “Windows Defender Firewall with Advanced Security,” and run it as an Administrator.
   2. Make sure that the firewall is enabled, and click on “Allow an app or feature through Windows Defender Firewall”.
   3. Click on “Change Settings,” then “Allow another app”.
   4. Click on “Browse” and find the TFTP.exe from the System32 folder and click on Open. Then click on “Add”.
   5. You can now, find the application on the Windows Defender Firewall, enable both Private and Public.

   Transferring Files with TFTP

   Now that you enabled the native TFTP client in Windows, you can use it to transfer files between the TFTP server.

   As mentioned before, make sure that the files are present in the root folder and that the client and server can reach each other.

   The TFTP client runs through the command line interface. The command sytax is:

   An example of using the TFTP command on Windows 10:

   In this example, we will upload a firmware image file [.bin] to the TFTP server [192.168.1.20]. We will use the TFTP client in Windows and transfer the file using binary mode.

   1. Let’s open the Windows command prompt. Open the Windows search and type “cmd,” or press the Win + R > Open the Run and type “cmd”.
   2. Go to the directory where the firmware is stored (or specify the entire path).
   3. Type the command TFTP -i 192.168.1.20 PUT firmware.bin

   Final Words

   TFTP is a terrific and often misunderstood transferring method.

   Although it has a bad reputation for its lack of security, it doesn’t have much overhead, making it a reliable, quick, and easy transferring mechanism.

   You can use it in enclosed LANs or WANs, where speed reigns over security.

   Setting up a TFTP server on Windows 10 is straightforward. Just download the SolarWinds Free TFTP Server and configure it, as shown in this tutorial.

   If your TFTP client is a networking device, it will likely have the TFTP service already enabled. But if you want to transfer files to a Windows 10 workstation, you can enable the TFTP built-in feature.

   We hope that this tutorial was informative.

   Please comment if you have any questions about the setup and configuration of the TFTP on your Windows 10.

   Setup & Configure TFTP On Windows 10 FAQs

   What is TFTP?

   TFTP stands for Trivial File Transfer Protocol. It is a simple file transfer protocol used for transferring files between devices on a network. It is commonly used in network devices such as routers, switches, and servers.

   How do I use TFTP in Windows 10?

   To use TFTP in Windows 10, you can use a TFTP client such as SolarWinds TFTP Server or TFTPD32. These programs will allow you to transfer files to and from a device using the TFTP protocol. You can also use the built-in «tftp» command in Command Prompt to transfer files.

   Can I use TFTP to transfer files between two Windows 10 computers?

   Yes, you can use TFTP to transfer files between two Windows 10 computers by using a TFTP client on both computers. You will need to configure the IP address and directory settings on the TFTP client to ensure that the files are transferred properly.

   Is TFTP a secure protocol?

   No, TFTP is not a secure protocol as it does not provide any encryption or authentication. It is recommended to use more secure protocols such as SFTP or SCP for transferring sensitive files.

   How do I troubleshoot TFTP errors in Windows 10?

   To troubleshoot TFTP errors in Windows 10, you can check the TFTP client settings to ensure they are correct. You can also check the firewall settings on the computer to ensure that TFTP traffic is not being blocked. Additionally, you can check the event logs on both computers for any error messages that may indicate the source of the problem.

   Are there any alternatives to TFTP for file transfer?

   Yes, alternatives to TFTP include FTP (File Transfer Protocol), SFTP (Secure File Transfer Protocol), and SCP (Secure Copy Protocol). These protocols provide more security and advanced features than TFTP.