HTML в PHP — Веб-разработка на PHP
Главный секрет PHP заключается в том, что сам язык — шаблонизатор. Если вы посмотрите любой другой язык, то в его файлах не увидите ничего похожего на теги: <?php . ?> . В PHP любой файл с кодом это шаблон, причём этот шаблон не имеет никакой структуры (как бывает в некоторых шаблонизаторах). Вы можете создать PHP-файл, написать любой текст вне тегов <?php ?> , запустить код на выполнение и, внезапно, он не упадёт с указанием синтаксической ошибки.
Запуск этого "кода" выведет весь текст на экран:
То же самое касается HTML, так как это всего лишь текст. Достаточно в любом PHP-файле добавить немного HTML и запустить его, как он будет выведен на экран:
Запуск этого "кода" выведет весь текст на экран:
Такое поведение языка существует исключительно ради создания сайтов. Если запустить веб-сервер в директории с этим файлом index.php, то при обращении к этому "сайту", мы получим ровно тот же вывод что и в терминале. А это значит, что мы можем заменить такой код:
Отсюда следует очень важный вывод. Любой PHP файл, на самом деле – обычный текстовый файл со вставками PHP кода (с помощью тегов <?php ?> ). Любой текст написанный внутри него, отдается в вывод как есть, будь то браузер или запуск в командной строке.
Теперь добавим немного PHP. Шаблон становится шаблоном тогда, когда внутри него появляется подстановка данных. Принцип работы такой, абсолютно в любом месте шаблона вставляются теги <?php ?> внутри которых можно написать код. Фактически мы имеем дело с обычной строковой интерполяцией:
Добавим немного программирования. Запуск следующего кода, вернёт такой же результат, что и код выше:
В данном примере я добавил один блок сверху файла, внутри которого создал переменную. Затем, использовал её в другой вставке. Все содержимое файла находится в одном пространстве и блоки кода определённые дальше по тексту имеют доступ к данным предыдущих блоков. Что важно, подстановка данных из кода происходит только в том случае, если этот код выполняет печать.
Вывод на экран после запуска:
Для удобства вставки кода в HTML, PHP предлагает альтернативный синтаксис для стандартных конструкций языка. Например, для вставки значения используется сокращённая версия тега начала PHP-кода: <?= <код на php> ?> , она отличается от полной тем что вместо <?php echo . используется <?= . .
Сокращённая вставка
If
Switch
Foreach
С одной стороны, поддержка CGI внутри самого языка позволяет начать делать сайт буквально на коленке без особых знаний программирования и HTTP, что многие и делают. С другой, PHP толкает к созданию абсолютно не поддерживаемого кода, который не может никто прочитать кроме автора. Посмотрите сами:
Открыть доступ
Курсы программирования для новичков и опытных разработчиков. Начните обучение бесплатно
Как вставить HTML, CSS и JS в PHP-код?
Когда вы разрабатываете свой модуль, то иногда прибегаете к помощи верстки (HTML и CSS) и дополнительным скриптам.
Все это можно подключать отдельно – что-то в теле страницы, что-то в отдельных файлах. Но некоторые дополнения лучше вставлять непосредственно в сам PHP-файл.
Сегодня я покажу два варианта, как можно вставить HTML, CSS или JavaScript в код PHP.
Первый вариант вставки элементов в PHP-код
Я думаю, что если вы хоть немного знакомы с PHP, то знаете, что такое «echo» (тег, с помощью которого вы можете вывести сообщение на экран).
Вот с помощью него и можно вывести один из перечисленных ранее кодов. Пример:
На что здесь стоит обратить внимание? Кавычки. Если вы используете внешние кавычки в виде » «, то внутренние кавычки элементов должны быть ‘ ‘ и наоборот, иначе вы получите ошибку. Если вы принципиально хотите использовать одинаковые и внешние, и внутренние кавычки, то во внутренних ставьте знак экранизации:
В этом случае все будет работать корректно.
Второй вариант вставки элементов в PHP-код
Этот вариант мне нравится куда больше, чем первый. Здесь мы будем также использовать «echo», как и в предыдущем варианте, но добавим еще элемент «HTML»:
Сюда вы можете вставлять любой элемент, будь то HTML-код или же JavaScript. Кавычки здесь не играют роли (можете вставить любые), а по желанию можно внедрить переменные для вывода:
What is the best way to insert HTML via PHP?
Talking from a ‘best practice’ point of view, what do you think is the best way to insert HTML using PHP. For the moment I use one of the following methods (mostly the latter), but I’m curious to know which you think is best.
11 Answers 11
If you are going to do things that way, you want to separate your logic and design, true.
But you don’t need to use Smarty to do this.
Priority is about mindset. I have seen people do shocking things in Smarty, and it eventually turns into people developing sites in Smarty, and then some bright spark will decide they need to write a template engine in Smarty (Never underestimate the potential of a dumb idea).
If you break your code into two parts and force yourself to adhere to a standard, then you’ll get much better performance.
PHP Was written as a templating engine, so you at least should try to use it for its designed task before assessing whether or not you need to delve into Smarty.
Moreover, if you decide to use a templating engine, try get one that escapes HTML by default and you «opt out» instead of «opt in.» You’ll save yourself a lot of XSS headaches. Smarty is weak in this respect, and because of this, there are a lot of content-naïve templates written in it.
Is generally how Smarty templates go. The problem is $dangerous_value can be arbitrary HTML and this just leads to even more bad coding practices with untraceable spaghetti code everywhere.
Any template language you consider should cater to this concern. e.g.:
This way, your potential doorways for exploitation are easily discernible in the template, as opposed to the doorway to exploitation being the DEFAULT behaviour.
-1 for the typical hysterical ‘use [my favourite templating system] instead!’ posts. Every PHP post, even if the native PHP answer is a one-liner, always degenerates into this, just as every one-liner JavaScript question ends up full of ‘use [my favourite framework] instead!’. It’s embarrassing.
Seriously, we know about separating business logic and presentation concerns. You can do that — or not do that — in any templating system, whether PHP, Smarty or something completely different. No templating system magically separates your concerns without a bunch of thinking.
(In fact a templating system that is too restrictive can end up with you having to write auxiliary code that is purely presentational, cluttering up your business logic with presentational concerns. This is not a win!)
To answer the question that was asked, the first example is OK, but very difficult to read due to the bad indentation. See monzee’s example for a more readable way; you can use the : notation or <>s, whichever you prefer, but the important thing for readability is to keep your HTML and PHP as a single, ‘well-formed’ indented hierarchy.
And a final plea: remember htmlspecialchars(). Every time plain text needs to go in to a web page, this must be used, or it’s XSS all over the floor. I know this question isn’t directly related to that, but every time we post example code including < ?php echo($title) ?> or a framework equivalent without the escaping, we’re encouraging the continuation of the security disaster area that most PHP apps have become.
How to Use HTML Inside PHP on the Same Page
Here in this file as you can see that PHP code is being put inside html tags namely HTML tag and BODY tag and php code is written inside PHP delimiters (lines 4 and 7) $name=”your name”; is a variable that stores the string inside ” ” and here string stores in variable name is Your name $ is used to declare a variable in PHP. Right now this is the only thing I know about variables and how to declare them in PHP. I am planning to read more about it later and then I’ll record what I understand through the blog post. print $name; Here I have used Print to show the value stored in the variable $name .
According to php.net
print is not actually a real function (it is a language construct) so you are not required to use parentheses with its argument list.
There is more to this function I suppose and will study it in detail. I could also have used echo to obtain the same thing. In line 10 see that I have put PHP code inside the bold html tag ( <b> ) which resulted in bold faced “your name” string. So this way you can put your PHP scripts inside any HTML tags. There are other alternative PHP delimiters you can use to tell server to distinguish between your php script and other webpage elements.
Although these alternative PHP delimiters can be used but I have read that these forms should be avoided and you in practice should use following PHP delimiter as used firstly inside HTML file
Html code inside PHP tags and using echo or print to show those HTML elements
We can use html tags inside PHP also as given below
So we can basically echo all the HTML construct and get it working.Another example could be
Hope you like post on HTML Inside PHP
Also Reads
How to run php file in windows : This post talks about how we can php file on the the window and do the testing before moving to the web server
uses of PHP : This has detailed description why PHP is so much used through out the world.
first php program : This is good starting point for anybody starting with PHP and talk in good detail about how to write your PHP program and execute it
Define constant in PHP
https://en.wikipedia.org/wiki/PHP
report this ad