How to effectively deal with bots on your site? The best protection against click fraud.
Когда вы знакомы с Python, вы, вероятно, знаете, что выражения увеличения и уменьшения (как до, так и после) не поддерживаются. Python был создан, чтобы быть понятным и последовательным. В лингвистике с выражениями ++ и — начинающий программист часто совершает ошибку: запутывая различия между выражениями инкремента / декремента, пост и до (как в приоритете, так и в возвращаемое значение). По сравнению со многими другими языками программирования, базовые выражения приращения и декремента не так необходимы. В этом руководстве мы узнаем об операторе приращения на 1 в коде Python. Убедитесь, что в вашей системе должен быть установлен и настроен инструмент Python. Следовательно, мы установили в нашей системе инструмент Spyder Python.
Пример 01:
В нашем первом примере мы рассмотрим, как добавить приращение на 1 в любой код Python. Сначала откройте инструмент Spyder и назовите файл кода test.py. В области кода напишите приведенный ниже код Python для увеличения 1 в переменной целочисленного типа. Сначала мы добавили поддержку python на нашу страницу spyder. Вы можете видеть, что мы определили целое число x, имеющее значение 0. После этого мы увеличили эту переменную x на 1, используя внутри оператора «+ =». После этого мы распечатали переменную x, чтобы увидеть, правильно ли работает приращение на 1. Сохраните код и нажмите кнопку «Выполнить», чтобы выполнить код Python.
Окна вывода показывают нам, что значение переменной x было увеличено на 1, поскольку изначально было 0. Это означает, что синтаксис, использованный выше для увеличения любой переменной на 1, работоспособен и надежен.
Пример 02:
Давайте рассмотрим различные способы увеличения переменной на 1. В этом случае мы снова добавили поддержку Python в окно Spyder. После этого мы объявили переменную x со значением 2. В 4-й строке мы использовали знак приращения «+», чтобы добавить 1 к предыдущему значению x, и результат снова был сохранен в переменной x. Это означает, что последнее значение имело приоритет здесь. После этого оператор печати напечатает новое замещенное значение. Сохраните свой код, чтобы увидеть результаты. Нажмите на кнопку «Выполнить», чтобы интерпретировать код.
Выходные данные показывают, что значение 2 переменной x увеличилось на 1 и стало 3. Затем это значение снова было сохранено в переменной x и распечатано.
Пример 03:
Как мы уже упоминали выше, операторы инкремента и декремента нельзя использовать в языке программирования Python, так как они здесь бесполезны. Давайте проверим, правда это или нет, чтобы прояснить понимание. Следовательно, мы обновили код и инициализировали переменную «n», имеющую значение 2. Затем мы использовали оператор предварительного приращения, чтобы увеличить его значение, и снова сохранили это значение в переменной «n». После оператора печати мы сохранили код и выполнили его через знак «Выполнить».
Когда мы выполнили код, мы знаем, что исходное значение не было увеличено, и вывод показывает то же исходное значение в своем результате. Это означает, что оператор предварительного приращения здесь не работает и бесполезен при программировании.
Давайте теперь проверим оператор постинкремента. Мы снова использовали тот же код при замене оператора предварительного приращения на оператор пост-приращения, как показано в приведенном ниже коде.
Выходные данные приведенного выше кода возвращают синтаксическую ошибку, в которой говорится, что синтаксис недействителен. Это доказывает, что операторы post и pre-increment или декремента бесполезны в python.
Пример 04:
Давайте посмотрим на простой пример увеличения переменной на 1. Сначала мы использовали переменную со значением 0. Исходное значение было распечатано, а затем значение было увеличено на 1 с помощью знака «+ =». Тогда новое значение должно быть теперь 1. Новое значение будет распечатано. Затем мы снова использовали оператор «+ =», чтобы на этот раз увеличить значение на 30, и распечатали его. Сохраните код и выполните его с помощью кнопки «Выполнить».
Результат ниже показывает ожидаемые результаты. Сначала отображается исходное значение 0, а после приращения 1 выводится 1. В итоге значение 1 увеличилось на 30 и стало 31.
Пример 05:
Давайте воспользуемся оператором увеличения на 1 для любого значения строкового типа и посмотрим его результаты. Прежде всего, мы взяли целочисленную переменную «x», как в приведенном выше примере. Переменная x имеет исходное значение 0. Его значение было увеличено на 1, а затем на 31. Это тот же случай, который мы обсуждали выше. А вот еще одна переменная «y» со значением «Aqsa». Затем мы использовали знак «+ =», чтобы увеличить значение переменной «y» на 1. Логически это неверно, потому что целочисленное значение не может увеличиваться в строковом значении. Итак, мы должны получить ошибку при выполнении этого кода. Итак, сохраните свой код и выполните его.
Когда мы распечатали код, приращение, выполненное для переменной целочисленного типа «x», было успешным и каждый раз отображало увеличенное значение. Но в случае переменной «y» генерируется исключение «TypeError», в котором говорится, что данные строкового типа могут быть объединены только со строковыми данными, а не с данными целочисленного типа.
Давайте изменим код и увеличим целочисленное значение «y» на значение строкового типа, как показано в приведенном ниже коде. Сохраните свой код и запустите файл, чтобы увидеть, как они работают.
На этот раз отображаются все увеличенные значения, включая значение приращения строкового типа в выходных данных. Это связано с тем, что знак + можно рассматривать как объединение строк и не может увеличивать целочисленное значение до некоторого строкового значения.
Пример 06:
Поймите, что мы также не можем использовать операторы пре- и пост-инкремента или декремента в циклах «for». Следовательно, мы использовали оператор «+ =» в цикле while для печати значений списка.
После выполнения кода мы получили значения списка одно за другим в последовательности.
Пример 07:
Давайте посмотрим на эффект увеличения на 1 переменной «ID» на этот раз. Мы инициализировали переменную «x» значением 2 и сначала проверили ее «ID». После этого нам нужно увеличить его на 1 и еще раз проверить его «ID». Сохраните и запустите код.
Во время выполнения кода выходные данные показывают два разных «идентификатора» до и после увеличения на 1. Это означает, что каждый раз, когда мы увеличиваем или изменяем переменную, ее динамика также изменяется.
Вывод:
В этом руководстве обсуждалось и было показано, как операторы post и pre-increment или декремента терпят неудачу в python. Мы также увидели, как использовать разные способы увеличения любой переменной на 1. Надеюсь, эта статья будет вам полезна при использовании Python.
Python Increment Operation
How do you perform a Python increment operation? If you’re coming from a language like C++ or Java, you may want to try extending a similar increment functionality to Python also.
But, as we will see in this article, this is not quite the same. Let’s look at how we can try to use similar functionality of the Increment ( ++ ) operation in Python.
Python Increment
Before going with the exact differences, we’ll look at how we can increment a variable in Python.
The below code shows how almost all programmers increment integers or similar variables in Python.
We have incremented the integer variable a in successive steps here. Also, since the + operator also stands for concatenation with respect to Strings, we can also append to a string in place!
Can we post-increment a by 1, using a++ ?
Well, there is a problem here. Python, by design, does not allow the use of the ++ “operator”. The ++ term, is called the increment operator in C++ / Java, does not have a place in Python.
Why is there no ++ operator in Python?
If you want to understand this in more detail, you need to have some background on programming language design.
The option of not including the ++ operator in Python is a design decision. People who are responsible for creating features in the Python language felt that there was no need to introduce a CPP-style increment operator.
When the Python interpreter parses the a++ symbol from our input, it is interpreted in the following fashion:
- Since the binary + operator is the addition operator, a++ will be treated as a , + , and + . But Python expects a number after the first + operator. Therefore, it will give a syntax error on a++ , since the second + is not a number.
Similarly, the pre-increment ++a , will be treated like this:
- The unary + operator in Python refers to the identity operator. This simply returns the integer after it. This is why it is an identity operation on the integer
- For example, the value of +5 is simply 5 , and for +-5 , it is -5 . This is a unary operator, which works on real numbers
- The ++a will be parsed as + and +a , but the second +a is again treated as (+a) , which is simply a
- Therefore, +(+(a)) simply evaluates to a .
So, even though we wanted to increment the value of a by one, we cannot achieve this using the ++ symbols, since this kind of operator, does not exist.
We must, therefore, use the += operator to do this kind of increment.
The same logic holds true for the decrement operation also.
How is the += operation evaluated?
You may think that since there is an = symbol, it could be an assignment statement.
However, this is not a regular assignment statement. This is called an augmented assignment statement.
In a regular assignment statement, the right-hand side is evaluated first, before this assigning it to the left-hand side.
However, in this augmented assignment statement, the left side is evaluated first, before evaluating the right side. This is done so that the updated value can be written to the left side in-place.
This is the only way for incrementing a variable, without using a reassigning statement like a = a + 1 . But here, overall, the option doesn’t matter anyway, since the interpreter will optimize the code at runtime.
Conclusion
In this article, we learned about how we can use the increment operation in Python, and why the ++ and — operators are not supported.
Behaviour of increment and decrement operators in Python
How do I use pre-increment/decrement operators ( ++ , — ), just like in C++?
Why does ++count run, but not change the value of the variable?
11 Answers 11
++ is not an operator. It is two + operators. The + operator is the identity operator, which does nothing. (Clarification: the + and — unary operators only work on numbers, but I presume that you wouldn’t expect a hypothetical ++ operator to work on strings.)
Which translates to
You have to use the slightly longer += operator to do what you want to do:
I suspect the ++ and — operators were left out for consistency and simplicity. I don’t know the exact argument Guido van Rossum gave for the decision, but I can imagine a few arguments:
- Simpler parsing. Technically, parsing ++count is ambiguous, as it could be + , + , count (two unary + operators) just as easily as it could be ++ , count (one unary ++ operator). It’s not a significant syntactic ambiguity, but it does exist.
- Simpler language. ++ is nothing more than a synonym for += 1 . It was a shorthand invented because C compilers were stupid and didn’t know how to optimize a += 1 into the inc instruction most computers have. In this day of optimizing compilers and bytecode interpreted languages, adding operators to a language to allow programmers to optimize their code is usually frowned upon, especially in a language like Python that is designed to be consistent and readable.
- Confusing side-effects. One common newbie error in languages with ++ operators is mixing up the differences (both in precedence and in return value) between the pre- and post-increment/decrement operators, and Python likes to eliminate language «gotcha»-s. The precedence issues of pre-/post-increment in C are pretty hairy, and incredibly easy to mess up.
Python does not have pre and post increment operators.
In Python, integers are immutable. That is you can’t change them. This is because the integer objects can be used under several names. Try this:
a and b above are actually the same object. If you incremented a, you would also increment b. That’s not what you want. So you have to reassign. Like this:
Many C programmers who used python wanted an increment operator, but that operator would look like it incremented the object, while it actually reassigns it. Therefore the -= and += operators where added, to be shorter than the b = b + 1 , while being clearer and more flexible than b++ , so most people will increment with:
Which will reassign b to b+1 . That is not an increment operator, because it does not increment b , it reassigns it.
In short: Python behaves differently here, because it is not C, and is not a low level wrapper around machine code, but a high-level dynamic language, where increments don’t make sense, and also are not as necessary as in C, where you use them every time you have a loop, for example.
Python Increment and Decrement Operators: An Overview
In this tutorial, you’ll learn how to emulate the Python increment and decrement operators. You’ll learn why no increment operator exists in Python like it does in languages like C++ or JavaScript. You’ll learn some Pythonic alternatives to emulate the increment and decrement operators. This will include learning how to increase a value by 1 in Python, or by any other number. You’ll also learn how increment strings.
Why is the increment operator important? It may seem pedantic to want to learn how to increase or decrease the value of a variable by the value of one. However, it actually has many very valuable applications. For example, you may want to run a while loop for a given number of times. This can be done easily while decreasing a variables numbers. Alternatively, you may want to develop a game where it’s important to keep track of the number of turns a player has played.
The Quick Answer: Use += or -= Augmented Assignment
Table of Contents
How to Increment a Value by 1 in Python
If you are familiar with other programming languages, such as C++ or Javascript, you may find yourself looking for an increment operator. This operator typically is written as a++ , where the value of a is increased by 1. In Python, however, this operator doesn’t exist.
Let’s try to implement the increment operator in Python and see what happens:
We can see that when we try to run the ++ operator that a SyntaxError is returned. This is because Python interprets only the first + operator and cannot interpret what to do with the second.
Is there a ++ operator in Python? No, there is no ++ operator in Python. This was a clear design decision by the developers of the Python language. Whatever the design reason actually was is unknown. What is known is that the operator doesn’t exist in Python. Because of this we need an alternative.
One alternative is simply to modify the original variable:
What is actually happening here? Because integers are immutable, when we add 1 to the integer we actually create a new variable. Let’s confirm this by checking the IDs of the variables before and after modification:
We can see that the ID of the variable has changed when we mutated.
Python Increment Shorthand: The Augmented Assignment Operator
The approach shown above works, but it’s also a bit tedious. We can implement an alternative to this approach. This alternative is the augmented assignment operator. The way that works is by reassigning the value to itself in a modified way.
Let’s see what this looks like:
Similar to the approach above, this does create an entirely new variable (since integers are immutable). Let’s confirm this again by simply printing the IDs:
One of the benefits of this approach is that we can actually increment the value by whatever we like (rather than being limited to 1). For example, if we wanted to increment the value by two, we could simply write a += 2 .
In the next section, you’ll learn how to emulate the — decrement operator in Python.
How to Decrement a Value by 1 in Python
Similar to incrementing a value in Python, decrementing a value works a little differently than you might expect coming from other languages. Because there is no decrement operator in Python, we need to use augmented assignment.
We can simply use the -= augment assignment operator to decrement a value. Let’s see what this looks like:
While this approach is slightly longer than write a— , it’s the shortest workaround that is allowable in Python. Because Python integers are immutable, we need a shorthand way to reassign a value to itself.
In the next section, you’ll learn how to use the augmented assignment operator to increment a value in a Python while loop.
How to Increment a Value in a Python While Loop
Python while loops will continue to execute a Python statement (or statements) while a condition is true. In many cases, you can easily set a loop to continue running until a value is equal to a certain value. For example, you can set a loop to run ten times by incrementing a value by 1:
This is an extremely simplified example, but because of the versatility of Python while loops we can actually take this much, much further. For example, we could embed conditions into the loop or append to different data structures.
How to Increment a Python String
In this final section, you’ll explore how to increment a Python string. Because strings, like integers, are immutable in Python, we can use the augmented assignment operator to increment them.
This process works similar to string concatenation, where normally you’d add two strings together. Let’s see what this may look like:
We can simplify this using the augmented assignment operator:
There are a few important notes about this:
- The -= augmented assignment operator will raise a TypeError
- Both types must be the same. If appending an integer with += , you must first convert the integer to a string using the str() function
Conclusion
In this tutorial, you learned how to emulate the increment and decrement operators, ++ and — , in Python. You learned why these operators don’t work and how to increment with Python using the augmented assignment operators, += and -= . You then learned how to increment and decrement in a Python while loop and how to increment strings in Python.
To learn more about the augmented assignment operators, check out the official documentation here.