Cisco anyconnect login failed что делать

My company recently took over IT operations for another company. We have next to no documentation to go off of.

Users use CiscoAnyconnect for VPN and we need to be able to manage this system for them.

One user is getting «Login Failed» when trying to connect and I cannot find a way to get their password reset. I can confirm that their AD environment is not integrated with Cisco VPN.

Any guidance will be appreciated. where to start especially. We have access to their servers and domain controllers.

Исправление: AnyConnect не смог установить соединение с указанным безопасным шлюзом.

Что вызывает сообщение об ошибке «AnyConnect не смог установить соединение с указанным безопасным шлюзом»?

Проблема с антивирусом или брандмауэром: антивирусное программное обеспечение может время от времени мешать процессу подключения AnyConnect Client VPN и не позволять ему подключаться к внешним сетям или серверам из соображений безопасности. Часто он блокирует множество входящих и исходящих соединений. Таким образом, вы не сможете подключиться к своей любимой VPN с помощью Anyconnect.
Неправильная конфигурация клиента: если вы неправильно настроили свой клиент Anyconnect и хранящиеся в нем конфигурации VPN неверны, то вы столкнетесь с проблемами при установлении успешных соединений.
Интернет-ограничения: иногда IP-адреса некоторых стран могут быть заблокированы вашим интернет-провайдером, и вы можете сознательно не пытаться подключиться к VPN той же страны, которая была заблокирована вашим интернет-провайдером. Тогда вы столкнетесь с проблемами.

Решение 1. Отключение антивируса

Решение 2. Остановите службу подключения к Интернету

Нажмите Windows + R и введите services.msc.
Когда откроется окно со службами, найдите службу общего доступа к подключению Интернета . Щелкните его правой кнопкой мыши и выберите « Остановить» .
Затем выйдите из окна служб , закрыв его.

Решение 3. Отключите общий доступ к подключению к Интернету (ICS)

Откройте панель управления
Перейдите в раздел «Сеть и общий доступ к Интернету» и нажмите « Изменить настройки адаптера» .
После этого вам нужно будет щелкнуть правой кнопкой мыши по общему сетевому подключению , а затем выбрать « Свойства» .
В окне свойств нажмите на Совместное использование
Оказавшись там, вам нужно снять флажок с надписью « Разрешить другим пользователям сети подключаться через подключение к Интернету этого компьютера ».
После этого нажмите ОК.

Решение 4. Выберите параметр Подключиться к текущей сети в AnyConnect VPN.

Откройте клиент AnyConnect и там, где вы видите написанную сеть , щелкните ее правой кнопкой мыши.
Щелкните « Подключиться только к текущей сети ».

Решение 5. Попробуйте другое подключение

AnyConnect VPN Client Troubleshooting Guide — Common Problems

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This document describes a troubleshooting scenario which applies to applications that do not work through the Cisco AnyConnect VPN Client.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

The information in this document is based on a Cisco Adaptive Security Appliance (ASA) that runs Version 8.x.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Troubleshooting Process

This typical troubleshooting scenario applies to applications that do not work through the Cisco AnyConnect VPN Client for end-users with Microsoft Windows-based computers. These sections address and provide solutions to the problems:

Installation and Virtual Adapter Issues

Complete these steps:

Obtain the device log file:

Windows XP / Windows 2000:

Note: Hidden folders must be made visible in order to see these files.

If you see errors in the setupapi log file, you can turn up verbosity to 0x2000FFFF.

If this is an initial web deploy install, this log is located in the per-user temp directory.

Windows XP / Windows 2000:

If this is an automatic upgrade, this log is in the temp directory of the system:

The filename is in this format: anyconnect-win-x.x.xxxx-k9-install-yyyyyyyyyyyyyy.log. Obtain the most recent file for the version of the client you want to install. The x.xxxx changes based on the version, such as 2.0.0343, and yyyyyyyyyyyyyy is the date and time of the install.

From a Command Prompt/DOS box, type this:

Windows XP / Windows 2000:

Note: After you type into this prompt, wait. It can take between two to five minutes for the file to complete.

Windows XP and Windows Vista:

Refer to AnyConnect: Corrupt Driver Database Issue in order to debug the driver issue.

Disconnection or Inability to Establish Initial Connection

If you experience connection problems with the AnyConnect client, such as disconnections or the inability to establish an initial connection, obtain these files:

The configuration file from the ASA in order to determine if anything in the configuration causes the connection failure:

From the console of the ASA, type write net x.x.x.x:ASA-Config.txt where x.x.x.x is the IP address of a TFTP server on the network.

From the console of the ASA, type show running-config . Let the configuration complete on the screen, then cut-and-paste to a text editor and save.

In order to enable logging on the ASA for auth, WebVPN, Secure Sockets Layer (SSL), and SSL VPN Client (SVC) events, issue these CLI commands:

Start > Run

Note: Always save it as the .evt file format.

If the user cannot connect with the AnyConnect VPN Client, the issue might be related to an established Remote Desktop Protocol (RDP) session or Fast User Switching enabled on the client PC. The user can see the AnyConnect profile settings mandate a single local user, but multiple local users are currently logged into your computer. A VPN connection will not be established error message error on the client PC. In order to resolve this issue, disconnect any established RDP sessions and disable Fast User Switching. This behavior is controlled by the Windows Logon Enforcement attribute in the client profile, however currently there is no setting that actually allows a user to establish a VPN connection while multiple users are logged on simultaneously on the same machine. Enhancement request CSCsx15061 was filed to address this feature.

Note: Make sure that port 443 is not blocked so the AnyConnect client can connect to the ASA.

When a user cannot connect the AnyConnect VPN Client to the ASA, the issue might be caused by an incompatibility between the AnyConnect client version and the ASA software image version. In this case, the user receives this error message: The installer was not able to start the Cisco VPN client, clientless access is not available .

In order to resolve this issue, upgrade the AnyConnect client version to be compatible with the ASA software image.

When you log in the first time to the AnyConnect, the login script does not run. If you disconnect and log in again, then the login script runs fine. This is the expected behavior.

When you connect the AnyConnect VPN Client to the ASA, you might receive this error: User not authorized for AnyConnect Client access, contact your administrator .

This error is seen when the AnyConnect image is missing from the ASA. Once the image is loaded to the ASA, AnyConnect can connect without any issues to the ASA.

This error can be resolved by disabling Datagram Transport Layer Security (DTLS). Go to Configuration > Remote Access VPN > Network (Client) Access > AnyConnect Connection Profiles and uncheck the Enable DTLS check box. This disables DTLS.

The dartbundle files show this error message when the user gets disconnected: TUNNELPROTOCOLDPDMGR_ERROR_NO_DPD_RESPONSE:The secure gateway failed to respond to Dead Peer Detection packets . This error means that the DTLS channel was torn due to Dead Peer Detection (DPD) failure. This error is resolved if you tweak the DPD keepalives and issue these commands:

The svc keepalive and svc dpd-interval commands are replaced by the anyconnect keepalive and anyconnect dpd-interval commands respectively in ASA Version 8.4(1) and later as shown here:

Problems with Passing Traffic

When problems are detected with passing traffic to the private network with an AnyConnect session through the ASA, complete these data-gathering steps:

show vpn-sessiondb detail svc filter name <username>

Filter Name: XXXXX

show access-list XXXXX

For example, if the VPN Client needs to access a resource which is not in the routing table of the VPN Gateway, the packet is routed through the standard default gateway. The VPN gateway does not need the complete internal routing table in order to resolve this. The tunneled keyword can be used in this instance.

AnyConnect Crash Issues

Complete these data-gathering steps:

Start > Run

Drwtsn32.exe

When the crash occurs, gather the .log and .dmp files from C:\Documents and Settings\All Users\Application Data\Microsoft\Dr Watson. If these files appear to be in use, then use ntbackup.exe.

Start > Run

Note: Always save it as the .evt file format.

Fragmentation / Passing Traffic Issues

Some applications, such as Microsoft Outlook, do not work. However, the tunnel is able to pass other traffic such as small pings.

This can provide clues as to a fragmentation issue in the network. Consumer routers are particularly poor at packet fragmentation and reassembly.

Try a scaling set of pings in order to determine if it fails at a certain size. For example, ping -l 500, ping -l 1000, ping -l 1500, ping -l 2000.

It is recommended that you configure a special group for users that experience fragmentation, and set the SVC Maximum Transition Unit (MTU) for this group to 1200. This allows you to remediate users who experience this issue, but not impact the broader user base.

Problem

TCP connections hang once connected with AnyConnect.

Solution

In order to verify if your user has a fragmentation issue, adjust the MTU for AnyConnect clients on the ASA.

Uninstall Automatically

Problem

The AnyConnect VPN Client uninstalls itself once the connection terminates. The client logs show that keep installed is set to disabled.

Solution

AnyConnect uninstalls itself despite that the keep installed option is selected on the Adaptive Security Device Manager (ASDM). In order to resolve this issue, configure the svc keep-installer installed command under group-policy.

Issue Populating the Cluster FQDN

Problem: AnyConnect client is pre-populated with the hostname instead of the cluster Fully Qualified Domain Name (FQDN).

When you have a load-balancing cluster set up for SSL VPN and the client attempts to connect to the cluster, the request is redirected to the node ASA and the client logs in successfully. After some time, when the client tries to connect to the cluster again, the cluster FQDN is not seen in the Connect to entries. Instead, the node ASA entry to which the client has been redirected is seen.

Solution

This occurs because the AnyConnect client retains the host name to which it last connected. This behavior is observed and a bug has been filed. For complete details about the bug, refer to Cisco bug ID CSCsz39019. The suggested workaround is to upgrade the Cisco AnyConnect to Version 2.5.

Backup Server List Configuration

A backup server list is configured in case the main server selected by the user is not reachable. This is defined in the Backup Server pane in the AnyConnect profile. Complete these steps:

AnyConnectProfileEditor2_4_1.jar

Go to the server list tab.

Configuration

Remote Access VPN

Network (Client) Access

AnyConnect Connection Profiles

AnyConnect: Corrupt Driver Database Issue

This entry in the SetupAPI.log file suggests that the catalog system is corrupt:

W239 driver signing class list «C:\WINDOWS\INF\certclas.inf» was missing or invalid. Error 0xfffffde5: Unknown Error. , assuming all device classes are subject to driver signing policy.

You can also receive this error message: Error(3/17): Unable to start VA, setup shared queue, or VA gave up shared queue .

You can receive this log on the client: «The VPN client driver has encountered an error» .

Repair

This issue is due to Cisco bug ID CSCsm54689. In order to resolve this issue, make sure that Routing and Remote Access Service is disabled before you start AnyConnect. If this does not resolve the issue, complete these steps:

Open a command prompt as an Administrator on the PC (elevated prompt on Vista).

Failed Repair

If the repair fails, complete these steps:

Open a command prompt as an Administrator on the PC (elevated prompt on Vista).

Analyze the Database

You can analyze the database at any time in order to determine if it is valid.

Open a command prompt as an Admimistrator on the PC.

Error Messages

Error: Unable to Update the Session Management Database

While the SSL VPN is connected through a web browser, the Unable to Update the Session Management Database. error message appears, and the ASA logs show %ASA-3-211001: Memory allocation Error. The adaptive security appliance failed to allocate RAM system memory .

Solution 1

This issue is due to Cisco bug ID CSCsm51093. In order to resolve this issue, reload the ASA or upgrade the ASA software to the interim release mentioned in the bug. Refer to Cisco bug ID CSCsm51093 for more information.

Solution 2

This issue can also be resolved if you disable threat-detection on ASA if threat-detection is used.

Error: «Module c:\Program Files\Cisco\Cisco AnyConnect VPN Client\vpnapi.dll failed to register»

When you use the AnyConnect client on laptops or PCs, an error occurs during the install:

When this error is encountered, the installer cannot move forward and the client is removed.

Solution

These are the possible workarounds to resolve this error:

The latest AnyConnect client is no longer officially supported with Microsoft Windows 2000. It is a registry problem with the 2000 computer.

vpnapi.dll
vpncommon.dll
vpncommoncrypt.dll

The log message related to this error on the AnyConnect client looks similar to this:

Error: «An error was received from the secure gateway in response to the VPN negotiation request. Please contact your network administrator»

When clients try to connect to the VPN with the Cisco AnyConnect VPN Client, this error is received.

This message was received from the secure gateway:

«Illegal address class» or «Host or network is 0» or «Other error»

Solution

The issue occurs because of the ASA local IP pool depletion. As the VPN pool resource is exhausted, the IP pool range must be enlarged.

Cisco bug ID is CSCsl82188 is filed for this issue. This error usually occurs when the local pool for address assignment is exhausted, or if a 32-bit subnet mask is used for the address pool. The workaround is to expand the address pool and use a 24-bit subnet mask for the pool.

Error: Session could not be established. Session limit of 2 reached.

When you try to connect more than two clients with the AnyConnect VPN Client, you receive the Login Failed error message on the Client and a warning message in the ASA logs that states Session could not be established. Session limit of 2 reached . I have the AnyConnect essential license on the ASA, which runs Version 8.0.4.

Solution 1

This error occurs because the AnyConnect essential license is not supported by ASA version 8.0.4. You need to upgrade the ASA to version 8.2.2. This resolves the error.

Note: Regardless of the license used, if the session limit is reached, the user will receive the login failed error message.

Solution 2

This error can also occur if the vpn-sessiondb max-anyconnect-premium-or-essentials-limit session-limit command is used to set the limit of VPN sessions permitted to be established. If the session-limit is set as two, then the user cannot establish more than two sessions even though the license installed supports more sessions. Set the session-limit to the number of VPN sessions required in order to avoid this error message.

Error: Anyconnect not enabled on VPN server while trying to connect anyconnect to ASA

You receive the Anyconnect not enabled on VPN server error message when you try to connect AnyConnect to the ASA.

Solution

This error is resolved if you enable AnyConnect on the outside interface of the ASA with ASDM. For more information on how to enable AnyConnect on the outside interface, refer to Configure Clientless SSL VPN (WebVPN) on the ASA.

Error:- %ASA-6-722036: Group client-group User xxxx IP x.x.x.x Transmitting large packet 1220 (threshold 1206)

The %ASA-6-722036: Group < client-group > User < xxxx > IP < x.x.x.x> Transmitting large packet 1220 (threshold 1206) error message appears in the logs of the ASA. What does this log mean and how is this resolved?

Solution

This log message states that a large packet was sent to the client. The source of the packet is not aware of the MTU of the client. This can also be due to compression of non-compressible data. The workaround is to turn off the SVC compression with the svc compression none command. This resolves the issue.

Error: The secure gateway has rejected the agent’s vpn connect or reconnect request.

When you connect to the AnyConnect Client, this error is received: «The secure gateway has rejected the agent’s vpn connect or reconnect request. A new connection requires re-authentication and must be started manually. Please contact your network administrator if this problem persists. The following message was received from the secure gateway: no assigned address» .

This error is also received when you connect to the AnyConnect Client: «The secure gateway has rejected the connection attempt. A new connection attempt to the same or another secure gateway is needed, which requires re-authentication. The following message was received from the secure gateway:Host or network is 0» .

This error is also received when you connect to the AnyConnect Client: «The secure gateway has rejected the agent’s vpn connect or reconnect request. A new connection requires a re-authentication and must be started manually. Please contact the network administrator if the problem persists. The following message was received from the secure gateway: No License» .

Solution

The router was missing pool configuration after reload. You need to add the concerned configuration back to the router.

The «The secure gateway has rejected the agent’s vpn connect or reconnect request. A new connection requires a re-authentication and must be started manually. Please contact the network administrator if the problem persists. The following message was received from the secure gateway: No License» error occurs when the AnyConnect mobility license is missing. Once the license is installed, the issue is resolved.

Читать:

Usb disk security что это за программа

Error: «Unable to update the session management database»

When you try to authenticate in WebPortal, this error message is received: «Unable to update the session management database» .

Solution

This problem is related to memory allocation on the ASA. This issue is mostly encountered when the ASA Version is 8.2.1. Originally, this requires a 512MB RAM for its complete functionality.

As a permanent workaround, upgrade the memory to 512MB.

As a temporary workaround, try to free the memory with these steps:

Disable the threat-detection.

Error: «The VPN client driver has encountered an error»

This is an error message obtained on the client machine when you try to connect to AnyConnect.

Solution

In order to resolve this error, complete this procedure in order to manually set the AnyConnect VPN agent to Interactive:

My Computer > Manage > Services and Applications > Services

This sets the registry Type value DWORD to 110 (default is 010) for the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\vpnagent.

Note: If this is to be used, then the preference would be to use the .MST transform in this instance. This is because if you set this manually with these methods, it requires that this be set after every install/upgrade process. This is why there is a need to identify the application that causes this problem.

Error: «Unable to process response from xxx.xxx.xxx.xxx»

AnyConnect clients fail to connect to a Cisco ASA. The error in the AnyConnect window is «Unable to process response from xxx.xxx.xxx.xxx» .

Solution

In order to resolve this error, try these workarounds:

Remove WebVPN from the ASA and reenable it.<

For more information on how to enable WebVPN and change the port for WebVPN, refer to this Solution.

Error: «Login Denied , unauthorized connection mechanism , contact your administrator»

AnyConnect clients fail to connect to a Cisco ASA. The error in the AnyConnect window is «Login Denied , unauthorized connection mechanism , contact your administrator» .

Solution

This error message occurs mostly because of configuration issues that are improper or an incomplete configuration. Check the configuration and make sure it is as required to resolve the issue.

Error: «Anyconnect package unavailable or corrupted. Contact your system administrator»

This error occurs when you try to launch the AnyConnect software from a Macintosh client in order to connect to an ASA.

Solution

In order to resolve this, complete these steps:

Upload the Macintosh AnyConnect package to the flash of the ASA.

The svc image command is replaced by the anyconnect image command in ASA Version 8.4(1) and later as shown here:

Error: «The AnyConnect package on the secure gateway could not be located»

This error is caused on the user’s Linux machine when it tries to connect to the ASA by launching AnyConnect. Here is the complete error:

Solution

In order to resolve this error message, verify whether the Operating System (OS) that is used on the client machine is supported by the AnyConnect client.

If the OS is supported, then verify if the AnyConnect package is specified in the WebVPN configuration or not. See the Anyconnect package unavailable or corrupted section of this document for more information.

Error: «Secure VPN via remote desktop is not supported»

Users are unable to perform a remote desktop access. The Secure VPN via remote desktop is not supported error message appears.

Solution

This issue is due to these Cisco bug IDs: CSCsu22088 and CSCso42825. If you upgrade the AnyConnect VPN Client, it can resolve the issue. Refer to these bugs for more information.

Error: «The server certificate received or its chain does not comply with FIPS. A VPN connection will not be established»

When you attempt to VPN to the ASA 5505, the The server certificate received or its chain does not comply with FIPS. A VPN connection will not be established error message appears.

Solution

In order to resolve this error, you must disable the Federal Information Processing Standards (FIPS) in the AnyConnect Local Policy file. This file can usually be found at C:\ProgramData\Cisco\Cisco AnyConnect VPN Client\AnyConnectLocalPolicy.xml . If this file is not found in this path, then locate the file at a different directory with a path such as C:\Documents and Settings\All Users\Application Data\Cisco AnyConnectVPNClient\AnyConnectLocalPolicy.xml . Once you locate the xml file, make changes to this file as shown here:

Change the phrase:

<FipsMode>true</FipsMode>

<FipsMode>false</FipsMode>

Then, restart the computer. Users must have administrative permissions in order to modify this file.

Error: «Certificate Validation Failure»

Users are unable to launch AnyConnect and receive the Certificate Validation Failure error.

Solution

Certificate authentication works differently with AnyConnect compared to the IPSec client. In order for certificate authentication to work, you must import the client certificate to your browser and change the connection profile in order to use certificate authentication. You also need to enable this command on your ASA in order to allow SSL client-certificates to be used on the outside interface:

ssl certificate-authentication interface outside port 443

Error: «VPN Agent Service has encountered a problem and needs to close. We are sorry for the inconvenience»

When AnyConnect Version 2.4.0202 is installed on a Windows XP PC, it stops at updating localization files and an error message shows that the vpnagent.exe fails.

Solution

This behavior is logged in Cisco bug ID CSCsq49102. The suggested workaround is to disable the Citrix client.

Error: «This installation package could not be opened. Verify that the package exists»

When AnyConnect is downloaded, this error message is received:

«Contact your system administrator. The installer failed with the following error: This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package.»

Solution

Complete these steps in order to fix this issue:

Remove any anti-virus software.

Error: «Error applying transforms. Verify that the specified transform paths are valid.»

This error message is recieved during the auto-download of AnyConnect from the ASA:

This is the error message received when connecting with AnyConnect for MacOS:

Solution

Complete one of these workarounds in order to resolve this issue:

The root cause of this error might be due to a corrupted MST translation file (for example, imported). Perform these steps to fix this:

Remove the MST translation table.

If neither of these workarounds resolve the issue, contact Cisco Technical Support.

Error: «The VPN client driver has encountered an error»

This error is received:

Solution

This issue can be resolved when you uninstall the AnyConnect Client, and then remove the anti-virus software. After this, reinstall the AnyConnect Client. If this resolution does not work, then reformat the PC in order to fix this issue.

Error: «A VPN reconnect resulted in different configuration setting. The VPN network setting is being re-initialized. Applications utilizing the private network may need to be restored.»

This error is received when you try to launch AnyConnect:

Solution

In order to resolve this error, use this:

The svc mtu command is replaced by the anyconnect mtu command in ASA Version 8.4(1) and later as shown here:

AnyConnect Error While Logging In

Problem

The AnyConnect receives this error when it connects to the Client:

Solution

The issue can be resolved if you make these changes to the AnyConnect profile:

Add this line to the AnyConnect profile:

IE Proxy Setting is Not Restored after AnyConnect Disconnect on Windows 7

Problem

In Windows 7, if the IE proxy setting is configured for Automatically detect settings and AnyConnect pushes down a new proxy setting, the IE proxy setting is not restored back to Automatically detect settings after the user ends the AnyConnect session. This causes LAN issues for users who need their proxy setting configured for Automatically detect settings.

Solution

This behavior is logged in Cisco bug ID CSCtj51376. The suggested workaround is to upgrade to AnyConnect 3.0.

Error: AnyConnect Essentials can not be enabled until all these sessions are closed.

This error message is received on Cisco ASDM when you attempt to enable the AnyConnect Essentials license:

Solution

This is the normal behavior of the ASA. AnyConnect Essentials is a separately licensed SSL VPN client. It is entirely configured on the ASA and provides the full AnyConnect capability, with these exceptions:

No Cisco Secure Desktop (CSD) (including HostScan/Vault/Cache Cleaner)

This license cannot be used at the same time as the shared SSL VPN premium license. When you need to use one license, you need to disable the other.

Error: Connection tab on Internet option of Internet Explorer hides after getting connected to the AnyConnect client.

The connection tab on the Internet option of Internet Explorer hides after you are connected to the AnyConnect client.

Solution

This is due to the msie-proxy lockdown feature. If you enable this feature, it hides the Connections tab in Microsoft Internet Explorer for the duration of an AnyConnect VPN session. If you disable the feature, it leaves the display of the Connections tab unchanged.

Error: Few users getting Login Failed Error message when others are able to connect successfully through AnyConnect VPN

A few users receive the Login Failed Error message when others can connect successfully through the AnyConnect VPN.

Solution

This issue can be resolved if you make sure the do not require pre-authentication checkbox is checked for the users.

Error: The certificate you are viewing does not match with the name of the site you are trying to view.

During the AnyConnect profile update, an error is shown that says the certificate is invalid. This occurs with Windows only and at the profile update phase. The error message is shown here:

Solution

This can be resolved if you modify the server list of the AnyConnect profile in order to use the FQDN of the certificate.

This is a sample of the XML profile:

Note: If there is an existing entry for the Public IP address of the server such as <HostAddress> , then remove it and retain only the FQDN of the server (for example, <HostName> but not <Host Address> ).

Cannot Launch AnyConnect From the CSD Vault From a Windows 7 Machine

When the AnyConnect is launched from the CSD vault, it does not work. This is attempted on Windows 7 machines.

Solution

Currently, this is not possible because it is not supported.

AnyConnect Profile Does Not Get Replicated to the Standby After Failover

The AnyConnect 3.0 VPN client with ASA Version 8.4.1 software works fine. However, after failover, there is no replication for the AnyConnect profile related configuration.

Solution

This problem has been observed and logged under Cisco bug ID CSCtn71662. The temporary workaround is to manually copy the files to the standby unit.

AnyConnect Client Crashes if Internet Explorer Goes Offline

When this occurs, the AnyConnect event log contains entries similar to these:

Solution

This behavior is observed and logged under Cisco bug ID CSCtx28970. In order to resolve this, quit the AnyConnect application and relaunch. The connection entries reappear after relaunch.

Error Message: TLSPROTOCOL_ERROR_INSUFFICIENT_BUFFER

The AnyConnect client fails to connect and the Unable to establish a connection error message is received. In the AnyConnect event log, the TLSPROTOCOL_ERROR_INSUFFICIENT_BUFFER error is found.

Solution

This occurs when the headend is configured for split-tunneling with a very large split-tunnel list (approximately 180-200 entries) and one or more other client attributes are configured in the group-policy, such as dns-server.

In order to resolve this issue, complete these steps:

Reduce the number of entries in the split-tunnel list.

For more information, refer to Cisco bug ID CSCtc41770.

Error Message: «Connection attempt has failed due to invalid host entry»

The Connection attempt has failed due to invalid host entry error message is received while AnyConnect is authenticated with the use of a certificate.

Solution

In order to resolve this issue, try either of these possible solutions:

Upgrade the AnyConnect to Version 3.0.
Disable Cisco Secure Desktop on your computer.

For more information, refer to Cisco bug ID CSCti73316.

Error: «Ensure your server certificates can pass strict mode if you configure always-on VPN»

When you enable the Always-On feature on AnyConnect, the Ensure your server certificates can pass strict mode if you configure always-on VPN error message is received.

Solution

This error message implies that if you want to use the Always-On feature, you need a valid sever certificate configured on the headend. Without a valid server certificate, this feature does not work. Strict Cert Mode is an option that you set in the AnyConnect local policy file in order to ensure the connections use a valid certificate. If you enable this option in the policy file and connect with a bogus certificate, the connection fails.

Error: «An internal error occurred in the Microsoft Windows HTTP Services»

This Diagnostic AnyConnect Reporting Tool (DART) shows one failed attempt:

Also, refer to the event viewer logs on the Windows machine.

Solution

This could be caused due to a corrupted Winsock connection. Reset the connection from the command promt with this command and restart your windows machine:

netsh winsock reset

Error: «The SSL transport received a Secure Channel Failure. May be a result of a unsupported crypto configuration on the Secure Gateway.»

This Diagnostic AnyConnect Reporting Tool (DART) shows one failed attempt:

Solution

Windows 8.1 does not support RC4 according to the following KB update:

Either configure DES/3DES ciphers for SSL VPN on the ASA using the command «ssl encryption 3des-sha1 aes128-sha1 aes256-sha1 des-sha1» OR edit the Windows Registry file on the client machine as mentioned below:

Как исправить ошибку агента клиента VPN для Cisco AnyConnect

Cisco AnyConnect — это программное обеспечение VPN, которое включает расширенную защиту для блокировки вредоносных программ на конечных точках. Однако некоторые пользователи говорят, что не могут установить или запустить Cisco AnyConnect. Когда они пытаются установить или запустить AnyConnect, появляется сообщение об ошибке, в котором говорится, что агент клиента VPN не смог создать хранилище межпроцессного взаимодействия . Пользователи исправили это сообщение об ошибке с разрешениями ниже.

Как пользователи могут исправить ошибку агента клиента VPN?

1. Отключите общий доступ к Интернету

Отключение общего доступа к интернет-подключению является одним из наиболее распространенных исправлений для ошибки агента клиента VPN. Для этого нажмите сочетание клавиш Windows + R, которое открывает аксессуар «Запуск».
Введите ‘control.exe / имя Microsoft.NetworkAndSharingCenter’ в поле Открыть.
Нажмите кнопку ОК , чтобы открыть апплет Панели управления Центром управления сетями и общим доступом.
Нажмите Изменить настройки адаптера в левой части апплета панели управления.
Щелкните правой кнопкой мыши сетевое соединение с общим состоянием, чтобы выбрать « Свойства» .
Затем выберите вкладку «Общий доступ», показанную на снимке ниже.
Снимите флажок Разрешить другим пользователям подключаться к Интернету через этот компьютер .
Нажмите кнопку ОК .
Повторите вышеуказанные шаги для всех сетевых подключений с включенным общим доступом.
Перезагрузите Windows после отключения общего доступа к соединению.

2. Отключите службу ICS

Или попробуйте отключить службу ICS. Откройте аксессуар «Выполнить» в Windows.
Введите «services.msc» в поле «Открыть» и выберите опцию « ОК» .
Щелкните правой кнопкой мыши службу общего доступа к Интернету, указанную в окне «Службы», и выберите « Остановить» .
Дважды щелкните Internet Connection Sharing, чтобы открыть окно его свойств.
Щелкните раскрывающееся меню «Тип запуска», чтобы выбрать параметр « Отключено» .
Не забудьте нажать кнопку Применить .
Затем нажмите OK, чтобы выйти из окна.
После этого перезапустите Windows после выключения службы ICS.

Это два подтвержденных решения, которые исправили ошибку агента клиента VPN для пользователей Cisco AnyConnect. После исправления ошибки пользователи могут установить или запустить Cisco AnyConnect.

How to Fix Cisco AnyConnect VPN Authentication failed error?

Step 1
In the search field, type in Command Prompt, or just CMD.
Right click the top result, and select Run as Administrator.
Step 2
Enter net stop CryptSvc.
Step 3
Analyze the database to verify its validity by entering

Step 4
When prompted, choose OK to attempt the repair. Exit the command prompt and reboot the computer.

How to Fix Cisco AnyConnect VPN Authentication failed error?

Step-by-Step to fix VPN Authentication failed Error

Method 2 : Step-by-Step to fix Cisco Anyconnet VPN Authentication

Step 4
Exit the command prompt and reboot the computer.

Method 3 : Download the Latest Cisco anyconnect secure mobility client

Cisco anyconnect for windows download and Cisco anyconnect secure mobility client mac Click here

Steps to install Cisco anyconnect secure mobility client on Windows and Mac

Extract the zip file and click on Setup.exe

Select the list of services required that your corporate network supports

Latest Cisco anyconnect secure mobility client Module

Please note : Do not install all services as this may not require and will cause lot of problem in connecting to vpn

After selecting the required services click installed services.

Latest version Cisco anyconnect secure mobility client will be installed

Note : When upgrading to version Cisco anyconnect secure mobility client, old version will be removed automatically no need to do manual uninstallation

Why Cisco anyconnect login failed

Check for Windows update, if any patches waiting for update or reboot, apply and reboot.
If the computer was in sleep mode or Hibernation mode, Reboot your computer.
Open Task manager, go to Details tab> search for vpngui.exe, end task.
Connect your laptop to Mobile hotspot and try connecting to Cisco anyconnect.

Above Steps will resolve Cisco anyconnect login failed Problem.

Why cisco anyconnect vpn service not available ?

In Windows 10 search type in Task Manager, open the app, then Go to Details scroll down to look for vpnui.exe , select and click on End task.
Scroll down look for vpnagent.exe, select and click on End task

In Windows 10 Search type in services, open the app, scroll down and look for
Cisco AnyConnect Secure Mobility Agent for Windows check services are running or not, if not start the service
Cisco Secure Operations Check services are running or not, if not start the service