The system has been destroyed что делать
Перейти к содержимому

The system has been destroyed что делать

  • автор:

 

The system has been destroyed что делать

Xiaomi Redmi 7 — Прошивки MIUI
ИзображениеHM7, onclite
Описание | Обсуждение » | Покупка » | Брак и ремонт » | Аксессуары » | Mi Аккаунт » | Клуб владельцев Redmi 7 » | Обсуждение камеры » | Модификации и украшательства » | Энергопотребление » | Разблокировка загрузчика » | Ядра » | Неофициальные прошивки » | Прошивки MIUI »

Android 10
12.5.3.0 Recovery | Fastboot
12.5.1.0 Recovery | Fastboot
12.0.1.0 Recovery | Fastboot
11.0.3.0 Recovery | Fastboot
11.0.2.0 Recovery | Fastboot
11.0.1.0 Recovery | Fastboot

Ошибка system has been destroyed при загрузке

1. Скачиваем и устанавливаем MiFlashPRO.
2. Логинимся в программе используя свой MI-аккаунт и пароль.
3. Выбираем своё устройство на домашней странице. Открываем вкладку ROM packages и скачиваем прошивку для recovery.
4. Переводим телефон в режим recovery. Для этого на выключенном телефоне зажимаем вместе кнопки: ЗВУК ВВЕРХ + ПИТАНИЕ и держим их пока не появится меню.
5. В меню выбираем "Connect With MiAssistant" и подключаем телефон к компьютеру. Устанавливаем драйвера: эти или эти.
6. Открываем вкладку recovery в программе и жмём кнопку "refresh device" -> телефон должен будет определиться, также сверху вы увидите свои imei.
7. Выбираем раннее скачанную прошивку нажав на три точки.
8. Жмём flash и ждём пока телефон прошьётся. В конце он включится без каких-либо ошибок.

How to Fix “The System Has Been Destroyed” Issue on Xiaomi Phones

Xiaomi smartphones usually work flawlessly, but sometimes it may act weirdly. An OTA update can cause the issue and sometimes it happened without any intervention by users. OTA updates sometimes will brick the phone leaving the message ‘the system has been destroyed’ on the boot screen. For example, many Xiaomi MI 9 SE users have faced the issue recently.

The “the system has been destroyed” message on the boot screen of your Xiaomi smartphone is an unwelcome issue, but it occurs rarely. It may happen after installing a major software update on the device, which carries several fixes, new features, and optimizations. Here’s how to fix this unwelcome issue on your phone.

Xiaomi-Mi-9

To fix the “the System Has Been Destroyed” issue on Xiaomi MI 9 SE, and other Xiaomi phones, the best method is flashing the fastboot ROM manually. But you can try the fix given in the steps below. This temporary fix may not work for all, so try your luck.

To fix “The System Has Been Destroyed” issue on Xiaomi phones, the best method is flashing the fastboot ROM on the device manually. However, you may try the fix given below. This temporary fix may not work for all, so try your luck. If this fix doesn’t help you to fix the problem, then flash the fastboot ROM on the phone via the Mi Flash tool.

Steps to fix ‘the system has been destroyed’ issue on Xiaomi Phones:

The-System-Has-Been-Destroyed

1. It requires ADB and fastboot driver setup on your computer. If you don’t have it, download latest version of Platform tools.

2. Boot your Xiaomi Mi 9 SE/other Xiaomi phone into fastboot mode with Volume Down + Power buttons combination after switching off it.

3. Connect the phone to your computer via a USB cable.

4. Open a command window/terminal inside the Platform tools folder. Type the command “ fastboot devices ” without quote and press the Enter key. This command lists all connected devices.

 

5. If your device’s ID listed in the command window/terminal, type below command “ fastboot continues ” and press Enter key.

6. This command sends “continue with autoboot” messages to the device. If you are lucky, your phone will boot into system.

If you are facing the system has been destroyed issue, you can try it on any Xiaomi and Redmi phone. If it doesn’t help, then only the solution is to install fastboot ROM on the phone. However, users should have some knowledge on ADB and fastboot drivers, Mi Flash tool and flashing firmware on the phone manually.

The system has been destroyed error on Xiaomi: How to Fix

In this guide, we will show you various methods to fix The system has been destroyed error on your Xiaomi device. The devices from this Chinese OEM are among the most popular ones in custom development. be it the Redmi Note, Poco, or Mi series, each one of them are blessed with a truckload of binaries. On the flip side though, they are also most prone to issues as well. And with Xiaomi blocking the ELD mod flashing for general users, things have become all the scarier.

The system has been destroyed error Xiaomi

On the fortunate side, there are a few issues that could easily be rectified from your end itself, without the need for any third-party intervention. One of them is The system has been destroyed error on Xiaomi devices. This happens when the recovery, system, or boot partition has been corrupted or if your device fails the vbmeta check. While all this might sound quite complicated, but trust us, it is quite easy to bring your device back to life from this error. So without further ado, let’s check out how this could be carried out.

Table of Contents

How to Fix The system has been destroyed error on Xiaomi

The system has been destroyed error Xiaomi

It is recommended that you try out each of the below-mentioned workarounds and then see which one spells out success for you. So with that in mind, let’s get started. Droidwin and its members wouldn’t be held responsible in case of a thermonuclear war, your alarm doesn’t wake you up, or if anything happens to your device and data by performing the below steps. NOTE: All the workarounds listed below require the bootloader on your device to be unlocked.

FIX 1: Disable Verity Check

First and foremost, you should disable the verification check by flashing the stock vbmeta file. Here’s how it could be done:

  1. To begin with, download and extract Android SDK Platform Tools on your PC. install adb platform tools windows
  2. Then download the Fastboot ROM for your device and extract it to any convenient location on your PC.
  3. Now copy the vbmeta.img file from there and transfer it to the platform-tools folder. The system has been destroyed error Xiaomi
  4. After that, force reboot your device to the Fastboot Mode and connect it to the PC via USB cable. The system has been destroyed error Xiaomi
  5. Then head over to the platform-tools folder, type in CMD in its address bar, and hit Enter.
  6. This will open the CMD window. So execute the below command to flash vbmeta and hence disable verity:
  7. Finally, execute the below command to boot your device to the OS
  8. Check if it fixes The system has been destroyed error on your Xiaomi device.

FIX 2: Flash Stock Boot and Recovery

The underlying issue could also arise due to the boot or recovery partition getting corrupted. Therefore, you should consider flashing the stock recovery and boot files to their respective partitions. Here’s how it could be done:

  1. To begin with, download and extract Android SDK Platform Tools on your PC. install adb platform tools windows
  2. Then download the Fastboot ROM for your device and extract it to any convenient location on your PC.
  3. Now copy the vbmeta.img, boot.img, and recovery.img files from there and transfer them to the platform-tools folder. The system has been destroyed error Xiaomi
  4. After that, force reboot your device to the Fastboot Mode and connect it to the PC via USB cable. The system has been destroyed error Xiaomi
  5. Then head over to the platform-tools folder, type in CMD in its address bar, and hit Enter.
  6. This will open the CMD window. So execute the below command to flash vbmeta and hence disable verity:
  7. After that, execute the below command to flash the boot.img file:
  8. Then type in the below command to flash the recovery.img file:
  9. Finally, execute the below command to boot your device to the OS
  10. Check if it fixes The system has been destroyed error on your Xiaomi device.

FIX 3: Flash Xiaomi Fastboot ROM

if none of the aforementioned methods spelled out success for you, then you will have to flash the complete Fastboot ROM. Here’s how it could be done [we are not using Mi Flash Tool because it could only complicate the matter further]

  1. First off, download and extract Android SDK Platform Tools on your PC. install adb platform tools windows
  2. Then download and extract the Fastboot ROM for your device.
  3. Now boot your device to Fastboot Mode and connect it to your PC via USB Cable. The system has been destroyed error Xiaomi
  4. Finally, double-click on the flash-all.bat file present in the Fastboot ROM to start the flashing. The system has been destroyed error Xiaomi
  5. Wait for the process to complete. Once done, your device will automatically boot to the OS.

That’s it. These were the three different methods that shall help you fix The system has been destroyed error on your Xiaomi device. If you have any queries concerning the aforementioned steps, do let us know in the comments. We will get back to you with a solution at the earliest.

About Chief Editor

Sadique Hassan

A technical geek by birth, he always has a keen interest in the Android platform right since the birth of the HTC Dream. The open-source environment always seems to intrigue him with the plethora of options available at his fingertips. “MBA by profession, blogger by choice!”

 

Добавить комментарий

Ваш адрес email не будет опубликован. Обязательные поля помечены *