Ping Virtual Box(Guest) from Windows(Host)
In this article we will set up our VirtualBox network interface that is easily accessible by the host machine. We will ping the VirtualBox from the host machine and also make sure VirtualBox is able to access the Internet.
Lets get started.
- Oracle VM VirtualBox [Ubuntu_18.04.3] [Guest]
- Windows 10 [Host]
Provided you have VirtualBox set up already done, I will be going through the steps here to set up the Network interfaces in Virtual box.
In the Oracle VM VirtualBox Manager we will add the Network Adapter i.e Host-Only Adapter. Check image below.
Above setting is done to so that our VM will share the host only network i.e. our Windows 10 host.
Login to your VM and now we will assign a static IP to our VM
- Once logged in VM, run below command
This will list down all the network interfaces in the VM. Output would be similar like below:-
Observe the IP address of eth0 interface. Now, try check the IP address of your host [Windows 10] by running command ipconfig. You will observe that the IPv4 DNS range is different from what is shown in above image.
Right now, If you ping the VM machine from Host machine it will not work because of the above reason. So, now we will assign a static IP to our VM so that both host and VM share the same DNS IP range and able to communicate with each other even if there is no Internet in town.
- Run below commands
There will be a file called 01-network-manager-all.yaml. We need to update this file with below content.
We are basically applying the IP 192.168.56.108 to our VM.
- Run below command now
Bingo we are done.Really.
Yes, now is the time to ping the VM from Host machine.
Go to your host machine terminal and run the command below
Most probably, you will see the output as below
Thats it. We have made it.
Now you can even do ssh or ftp from your host machine to VM machine without the need of Internet.
If you want to access the Internet on your VM too….then we have a solution for that too here.
If this post was helpful, please click the clap �� button below a few times to show your support! ⬇⬇
How to ping between two machines in VirtualBox?
I’m a complete beginner, and this is my first assignment. I’m supposed to create a virtual network to connect two virtual machines, and connect the two machines to the host. I believe I have done this.
Then I’m supposed to show that the two machines are connected by pinging one from the other and vice versa, however I have no idea how to do this. None of the things I have found on google works, I’m not sure if I’m just not using the right command or if there is something wrong with the network connection. So please, can someone tell me how to ping from one machine to the other?
Can't ping between two guest OS in Virtualbox
When i checked the IP, both the guest machines have same IP address, howz that possible. What is the required network setting i have to apply in guest OS for networking the guest os together(ping guest1 from guest2 and vice versa)
6 Answers 6
Choose Bridged Adapter for the connection of all VMs; the Windows VM will come up connected, while in Kali, after booting, issue the commands
Edit:
The above works if the host is connected to a LAN, because both VMs will then get the necessary information (IP address, router’s IP address, DNSs) from the LAN router.
If the host is not connected, you will need Host only network. Before configuring this in a VM, you must go to the panel File -> Preferences -> Network, select Host only Networks, click on the Plus sign, then the screwdriver. Under Adapter, choose:
Then go to DHCP server, and choose:
Save, then go to your VM panel, choose for the Network adapter Host only. There is no need to configure the Advanced Options. Start your two VMs; Windows will already be connected, for Kali you will need to issue the same two commands as above, i.e.:
At this point you will be connected to the Host; the host will be 192.168.56.1, and the two VMs 192.168.56.100 and 192.168.56.101 (which is which, between Windows and Kali, depends on which comes up first).
Just in case: you may also have two or more adapters on each VM, so that you can have simultaneously the Bridged adapter (or NAT) that connects you to the world, and the Host-Only adapter that connects to the host and to the other VMs. This however requires that you learn how to handle several connected adapters on Windows and Linux. It is not difficult, but it does require you to do some work.
How to ping ubuntu guest on VirtualBox [closed]
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 7 years ago .
I have an VM (VirtualBox) with Ubuntu. Host machine is Windows 7. How can I ping my Ubuntu from host and vice versa? Trying to set «Bridged» connection type in VM settings but there is no effect, I only lose my internet connection in Ubuntu.
3 Answers 3
In most cases simply switching the virtual machine network adapter to bridged mode is enough to make the guest machine accessible from outside.
Sometimes it’s possible for the guest machine to not automatically receive an IP which matches the host’s IP range after switching to bridged mode (even after rebooting the guest machine). This is often caused by a malfunctioning or badly configured DHCP on the host network.
For example, if the host IP is 192.168.1.1 the guest machine needs to have an IP in the format 192.168.1.* where only the last group of numbers is allowed to be different from the host IP.
You can use a terminal (shell) and type ifconfig ( ipconfig for Windows guests) to check what IP is assigned to the guest machine and change it if required.
If the host and guest IPs do not match simply setting a static IP for the guest machine explicitly should resolve the issue.
Using NAT (the default) this is not possible. Bridged Networking should allow it. If bridged does not work for you (this may be the case when your network adminstration does not allow multiple IP addresses on one physical interface), you could try ‘Host-only networking’ instead.
For configuration of Host-only here is a quote from the vbox manual(which is pretty good). http://www.virtualbox.org/manual/ch06.html:
For host-only networking, like with internal networking, you may find the DHCP server useful that is built into VirtualBox. This can be enabled to then manage the IP addresses in the host-only network since otherwise you would need to configure all IP addresses statically.
In the VirtualBox graphical user interface, you can configure all these items in the global settings via «File» -> «Settings» -> «Network», which lists all host-only networks which are presently in use. Click on the network name and then on the «Edit» button to the right, and you can modify the adapter and DHCP settings.