Как создать эффект наложения с помощью CSS
Есть несколько способов создания наложений. В этой статье мы покажем, как создать наложение с помощью CSS свойств.
Один из способов создания такого эффекта является абсолютное позиционирование HTML элемента на странице. Необходимо в разметке создать div, потом абсолютно позиционировать его с помощью свойства position, и дальше с помощью свойства z-index задать для div высокий z-index, чтобы он находился поверх всех остальных элементов страницы. Мы зададим более высокий z-index для следующего элемента div, которое откроется сверху наложения.
- Создайте два элемента div с классами «overlay» и «modal».
- Добавьте стиль к классу «overlay».
Для position задайте значение absolute, а z-index установите в 10.
- Добавьте стиль к «modal».
Здесь мы устанавливаем свойство position в fixed а z-index в 11, на 1px выше, чем слой наложения.
- Also, set style the body.
Мы устанавливаем position в значение relative.
И так, мы создали наложение. Давайте посмотрим результат!
Пример
Мы также можем создать наложение при помощи селекторов ::before и ::after.
Стили и решения этого метода во многом похожи на предыдущий. Только здесь необходимо добавить стиль к псевдоклассам ::before и ::after .
Как наложить один div поверх другого с помощью CSS
Вы можете использовать CSS-свойство position в сочетании со свойством z-index для наложения одного <div> поверх другого элемента <div> . Свойство z-index определяет порядок наложения позиционированных элементов (т. е. элементов, значение position которых является absolute , fixed , или relative ).
Давайте посмотрим следующий пример, чтобы понять, как это работает:
В приведенном выше примере элемент div с классом .stack-top будет расположен поверх другого div .
Подробнее см. Руководство по позиционированию в CSS, чтобы узнать больше о методах позиционирования CSS.
How to overlay one div over another div
I need assistance with overlaying one individual div over another individual div .
My code looks like this:
Unfortunately I cannot nest the div#infoi or the img , inside the first div.navi .
It has to be two separate div s as shown, but I need to know how I could place the div#infoi over the div.navi and to the right most side and centered on top of the div.navi .
9 Answers 9
I would suggest learning about position: relative and child elements with position: absolute .
The accepted solution works great, but IMO lacks an explanation as to why it works. The example below is boiled down to the basics and separates the important CSS from the non-relevant styling CSS. As a bonus, I’ve also included a detailed explanation of how CSS positioning works.
TLDR; if you only want the code, scroll down to The Result.
The Problem
There are two separate, sibling, elements and the goal is to position the second element (with an id of infoi ), so it appears within the previous element (the one with a class of navi ). The HTML structure cannot be changed.
Proposed Solution
To achieve the desired result we’re going to move, or position, the second element, which we’ll call #infoi so it appears within the first element, which we’ll call .navi . Specifically, we want #infoi to be positioned in the top-right corner of .navi .
CSS Position Required Knowledge
CSS has several properties for positioning elements. By default, all elements are position: static . This means the element will be positioned according to its order in the HTML structure, with few exceptions.
The other position values are relative , absolute , sticky , and fixed . By setting an element’s position to one of these other values it’s now possible to use a combination of the following four properties to position the element:
- top
- right
- bottom
- left
In other words, by setting position: absolute , we can add top: 100px to position the element 100 pixels from the top of the page. Conversely, if we set bottom: 100px the element would be positioned 100 pixels from the bottom of the page.
Here’s where many CSS newcomers get lost — position: absolute has a frame of reference. In the example above, the frame of reference is the body element. position: absolute with top: 100px means the element is positioned 100 pixels from the top of the body element.
The position frame of reference, or position context, can be altered by setting the position of a parent element to any value other than position: static . That is, we can create a new position context by giving a parent element:
- position: relative;
- position: absolute;
- position: sticky;
- position: fixed;
For example, if a <div > element is given position: relative , any child elements use the <div > as their position context. If a child element were given position: absolute and top: 100px , the element would be positioned 100 pixels from the top of the <div > element, because the <div > is now the position context.
The other factor to be aware of is stack order — or how elements are stacked in the z-direction. The must-know here is the stack order of elements are, by default, defined by the reverse of their order in the HTML structure. Consider the following example:
In this example, if the two <div> elements were positioned in the same place on the page, the <div>Top</div> element would cover the <div>Bottom</div> element. Since <div>Top</div> comes after <div>Bottom</div> in the HTML structure it has a higher stacking order.
The stacking order can be changed with CSS using the z-index or order properties.
We can ignore the stacking order in this issue as the natural HTML structure of the elements means the element we want to appear on top comes after the other element.
So, back to the problem at hand — we’ll use position context to solve this issue.
The Solution
As stated above, our goal is to position the #infoi element so it appears within the .navi element. To do this, we’ll wrap the .navi and #infoi elements in a new element <div > so we can create a new position context.
Then create a new position context by giving .wrapper a position: relative .
With this new position context, we can position #infoi within .wrapper . First, give #infoi a position: absolute , allowing us to position #infoi absolutely in .wrapper .
Then add top: 0 and right: 0 to position the #infoi element in the top-right corner. Remember, because the #infoi element is using .wrapper as its position context, it will be in the top-right of the .wrapper element.
Because .wrapper is merely a container for .navi , positioning #infoi in the top-right corner of .wrapper gives the effect of being positioned in the top-right corner of .navi .
And there we have it, #infoi now appears to be in the top-right corner of .navi .
The Result
The example below is boiled down to the basics, and contains some minimal styling.
An Alternate (Grid) Solution
Here’s an alternate solution using CSS Grid to position the .navi element with the #infoi element in the far right. I’ve used the verbose grid properties to make it as clear as possible.
An Alternate (No Wrapper) Solution
In the case we can’t edit any HTML, meaning we can’t add a wrapper element, we can still achieve the desired effect.
Instead of using position: absolute on the #infoi element, we’ll use position: relative . This allows us to reposition the #infoi element from its default position below the .navi element. With position: relative we can use a negative top value to move it up from its default position, and a left value of 100% minus a few pixels, using left: calc(100% — 52px) , to position it near the right-side.
Отображение одного div поверх другого
Я хочу, чтобы второй div #curtain появился поверх div #backdrop . Два div имеют одинаковый размер, однако я не уверен, как расположить второй div поверх другого.
4 ответа
Используйте CSS position: absolute; , а затем top: 0px; left 0px; в атрибуте style каждого DIV. Замените значения пикселей тем, что вы хотите.
Вы можете использовать z-index: x; для установки вертикального «порядка» (который находится «сверху» ). Замените x на число, более высокие числа вернутся к более низким номерам.
Вот как выглядит ваш новый код:
Есть много способов сделать это, но это довольно просто и позволяет избежать проблем с нарушением позиционирования встроенного контента. Возможно, вам также придется скорректировать поля/отступы.